# This is a list of everything that can be set in the settings screen. 1. `PROFILE` Allows choosing the active settings profile. See for more information. 1. midi settings See for more information. - `USB MIDI CHANNEL` The MIDI Channel to use when sending note events via USB, from 0-15. Channels are sometimes also numbered 1-16 in other software or hardware. - `TRS MIDI CHANNEL` The MIDI Channel to use when sending note events via the TRS jack, from 0-15. Channels are sometimes also numbered 1-16 in other software or hardware. - `MIDI VELOCITY` (0-127) The velocity value sent with NOTE ON events. 1. i2c settings See for more information. - `I2C MODE` - `off`: disable the i2c port. - `leader`: scan for `follower` devices when enabled and sync with them. Toggle this setting off and on again to re-scan. - `follower`: wait to be contacted by a `leader` device. - `I2C ADDRESS` The i2c address the device will listen on when in `follower` mode. 1. display settings - `FLIP DISPLAY` Whether to flip the oled display contents and the main grid 180°. Useful when boards are tiled with one another vertically. - `RGB EFFECT` The RGB scale highlighting effect. - `RGB BRIGHTNESS` (0-100%) Lowers the LED brightness, especially useful when filming or photographing the keyboard. - `JAM MODE FADE TIME` (0-20s) How quickly to fade out keys that have recently been pressed. 1. keyboard layout settings See for more information. - `KEYBOARD LAYOUT` - `LAYOUT START NOTE`