From 1654c7cdf0cdedf2d2c5befa560bcc5688428c65 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Sebastian=20W=C3=BCst?= <sebi@timewaster.de>
Date: Sun, 13 Sep 2015 17:30:35 +0200
Subject: Extensions: changed wording for tool offset correction

(bzr r14359)
---
 share/extensions/hpgl_output.inx | 4 ++--
 share/extensions/hpgl_output.py  | 2 +-
 share/extensions/plotter.inx     | 4 ++--
 share/extensions/plotter.py      | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/share/extensions/hpgl_output.inx b/share/extensions/hpgl_output.inx
index 7fa900dc8..673be29bb 100644
--- a/share/extensions/hpgl_output.inx
+++ b/share/extensions/hpgl_output.inx
@@ -28,8 +28,8 @@
     </page>
     <page name="overcutToolOffset" _gui-text="Plot Features ">
       <param name="overcut" type="float" min="0.0" max="100.0" precision="2" _gui-text="Overcut (mm):" _gui-description="The distance in mm that will be cut over the starting point of the path to prevent open paths, set to 0.0 to omit command (Default: 1.00)">1.00</param>
-      <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool offset (mm):" _gui-description="The offset from the tool tip to the tool axis in mm, set to 0.0 to omit command (Default: 0.25)">0.25</param>
-      <param name="precut" type="boolean" _gui-text="Use precut" _gui-description="Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)">true</param>
+      <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool (Knife) offset correction (mm):" _gui-description="The offset from the tool tip to the tool axis in mm, set to 0.0 to omit command (Default: 0.25)">0.25</param>
+      <param name="precut" type="boolean" _gui-text="Precut" _gui-description="Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)">true</param>
       <param name="flat" type="float" min="0.1" max="10.0" precision="1" _gui-text="Curve flatness:" _gui-description="Curves are divided into lines, this number controls how fine the curves will be reproduced, the smaller the finer (Default: '1.2')">1.2</param>
       <param name="autoAlign" type="boolean" _gui-text="Auto align" _gui-description="Check this to auto align the drawing to the zero point (Plus the tool offset if used). If unchecked you have to make sure that all parts of your drawing are within the document border! (Default: Checked)">true</param>
     </page>
diff --git a/share/extensions/hpgl_output.py b/share/extensions/hpgl_output.py
index fc4f248af..78edba53b 100755
--- a/share/extensions/hpgl_output.py
+++ b/share/extensions/hpgl_output.py
@@ -41,7 +41,7 @@ class HpglOutput(inkex.Effect):
         self.OptionParser.add_option('--mirrorY',       action='store', type='inkbool', dest='mirrorY',       default='FALSE', help='Mirror Y axis')
         self.OptionParser.add_option('--center',        action='store', type='inkbool', dest='center',        default='FALSE', help='Center zero point')
         self.OptionParser.add_option('--overcut',       action='store', type='float',   dest='overcut',       default=1.0,     help='Overcut (mm)')
-        self.OptionParser.add_option('--toolOffset',    action='store', type='float',   dest='toolOffset',    default=0.25,    help='Tool offset (mm)')
+        self.OptionParser.add_option('--toolOffset',    action='store', type='float',   dest='toolOffset',    default=0.25,    help='Tool (Knife) offset correction (mm)')
         self.OptionParser.add_option('--precut',        action='store', type='inkbool', dest='precut',        default='TRUE',  help='Use precut')
         self.OptionParser.add_option('--flat',          action='store', type='float',   dest='flat',          default=1.2,     help='Curve flatness')
         self.OptionParser.add_option('--autoAlign',     action='store', type='inkbool', dest='autoAlign',     default='TRUE',  help='Auto align')
diff --git a/share/extensions/plotter.inx b/share/extensions/plotter.inx
index 17b2ff185..84c9596fe 100644
--- a/share/extensions/plotter.inx
+++ b/share/extensions/plotter.inx
@@ -82,8 +82,8 @@
     </page>
     <page name="misc" _gui-text="Plot Features ">
       <param name="overcut" type="float" min="0.0" max="100.0" precision="2" _gui-text="Overcut (mm):" _gui-description="The distance in mm that will be cut over the starting point of the path to prevent open paths, set to 0.0 to omit command (Default: 1.00)">1.00</param>
-      <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool offset (mm):" _gui-description="The offset from the tool tip to the tool axis in mm, set to 0.0 to omit command (Default: 0.25)">0.25</param>
-      <param name="precut" type="boolean" _gui-text="Use precut" _gui-description="Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)">true</param>
+      <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool (Knife) offset correction (mm):" _gui-description="The offset from the tool tip to the tool axis in mm, set to 0.0 to omit command (Default: 0.25)">0.25</param>
+      <param name="precut" type="boolean" _gui-text="Precut" _gui-description="Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)">true</param>
       <param name="flat" type="float" min="0.1" max="10.0" precision="1" _gui-text="Curve flatness:" _gui-description="Curves are divided into lines, this number controls how fine the curves will be reproduced, the smaller the finer (Default: '1.2')">1.2</param>
       <param name="autoAlign" type="boolean" _gui-text="Auto align" _gui-description="Check this to auto align the drawing to the zero point (Plus the tool offset if used). If unchecked you have to make sure that all parts of your drawing are within the document border! (Default: Checked)">true</param>
       <param name="space" type="description">&#xa0;</param>
diff --git a/share/extensions/plotter.py b/share/extensions/plotter.py
index c0f180f60..e579e2630 100644
--- a/share/extensions/plotter.py
+++ b/share/extensions/plotter.py
@@ -53,7 +53,7 @@ class Plot(inkex.Effect):
         self.OptionParser.add_option('--mirrorY',           action='store', type='inkbool', dest='mirrorY',           default='FALSE', help='Mirror Y axis')
         self.OptionParser.add_option('--center',            action='store', type='inkbool', dest='center',            default='FALSE', help='Center zero point')
         self.OptionParser.add_option('--overcut',           action='store', type='float',   dest='overcut',           default=1.0,     help='Overcut (mm)')
-        self.OptionParser.add_option('--toolOffset',        action='store', type='float',   dest='toolOffset',        default=0.25,    help='Tool offset (mm)')
+        self.OptionParser.add_option('--toolOffset',        action='store', type='float',   dest='toolOffset',        default=0.25,    help='Tool (Knife) offset correction (mm)')
         self.OptionParser.add_option('--precut',            action='store', type='inkbool', dest='precut',            default='TRUE',  help='Use precut')
         self.OptionParser.add_option('--flat',              action='store', type='float',   dest='flat',              default=1.2,     help='Curve flatness')
         self.OptionParser.add_option('--autoAlign',         action='store', type='inkbool', dest='autoAlign',         default='TRUE',  help='Auto align')
-- 
cgit v1.2.3