From 44d1206c0e63d47eb87a7e6723bf1028ba16ffdd Mon Sep 17 00:00:00 2001 From: Nicolas Dufour Date: Sat, 27 Aug 2016 12:45:34 +0200 Subject: [Bug #1417923] Fixing issues with titles. Fixed bugs: - https://launchpad.net/bugs/1417923 (bzr r15079) --- share/tutorials/tutorial-advanced.fa.svg | 428 +++++++++++++++---------------- 1 file changed, 214 insertions(+), 214 deletions(-) (limited to 'share/tutorials/tutorial-advanced.fa.svg') diff --git a/share/tutorials/tutorial-advanced.fa.svg b/share/tutorials/tutorial-advanced.fa.svg index c2d04f493..cf2a630c1 100644 --- a/share/tutorials/tutorial-advanced.fa.svg +++ b/share/tutorials/tutorial-advanced.fa.svg @@ -36,16 +36,16 @@ - - از ctrl+ جهت بالا برای پیمایش به بالا استفاده کنید + + از ctrl+ جهت بالا برای پیمایش به بالا استفاده کنید - + ::ADVANCED -bulia byak, buliabyak@users.sf.net and josh andler, scislac@users.sf.net - - + + + @@ -53,62 +53,62 @@ bulia byak, buliabyak@users.sf.net and josh andler, scislac@users.sf.net drawing, path manipulation, booleans, offsets, simplification, and text tool. - - + + Use Ctrl+arrows, mouse wheel, or middle button drag to scroll the page down. For basics of object creation, selection, and -transformation, see the Basic tutorial in Help > Tutorials. +transformation, see the Basic tutorial in Help > Tutorials. - - Pasting techniques + + Pasting techniques - - + + After you copy some object(s) by Ctrl+C or cut by -Ctrl+X, the regular Paste command +Ctrl+X, the regular Paste command (Ctrl+V) pastes the copied object(s) right under the mouse cursor or, if the cursor is outside the window, to the center of the document window. However, the object(s) in the clipboard still remember the original place from which they were -copied, and you can paste back there by Paste in Place +copied, and you can paste back there by Paste in Place (Ctrl+Alt+V). - - + + - Another command, Paste Style (Shift+Ctrl+V), + Another command, Paste Style (Shift+Ctrl+V), applies the style of the (first) object on the clipboard to the current selection. The “style” thus pasted includes all the fill, stroke, and font settings, but not the shape, size, or parameters specific to a shape type, such as the number of tips of a star. - - + + - Yet another set of paste commands, Paste Size, scales the selection + Yet another set of paste commands, Paste Size, scales the selection to match the desired size attribute of the clipboard object(s). There are a number of commands for pasting size and are as follows: Paste Size, Paste Width, Paste Height, Paste Size Separately, Paste Width Separately, and Paste Height Separately. - - + + - Paste Size scales the whole selection to match the overall size of the clipboard -object(s). Paste Width/Paste Height scale the + Paste Size scales the whole selection to match the overall size of the clipboard +object(s). Paste Width/Paste Height scale the whole selection horizontally/vertically so that it matches the width/height of the clipboard object(s). These commands honor the scale ratio lock on the Selector Tool controls bar (between W and H fields), so @@ -119,8 +119,8 @@ they scale each selected object separately to make it match the size/width/heigh of the clipboard object(s). - - + + @@ -129,11 +129,11 @@ instances as well as between Inkscape and other applications (which must be able handle SVG on the clipboard to use this). - - Drawing freehand and regular paths + + Drawing freehand and regular paths - - + + @@ -141,34 +141,34 @@ handle SVG on the clipboard to use this). Pencil (freehand) tool (F6): - - - - - - - - - - - + + + + + + + + + + + If you want more regular shapes, use the Pen (Bezier) tool (Shift+F6): - - - - - - - - - - - + + + + + + + + + + + @@ -182,8 +182,8 @@ the current line segment or the Bezier handles to 15 degree increments. Pressing only the last segment of an unfinished line, press Backspace. - - + + @@ -194,11 +194,11 @@ only the last segment of an unfinished line, press new one. - - Editing paths + + Editing paths - - + + @@ -210,9 +210,9 @@ properties. But unlike a shape, a path can be edited by freely dragging any of i path and switch to the Node tool (F2): - - - + + + @@ -227,8 +227,8 @@ inverts node selection in the current subpath(s) (i.e. subpaths with at least on selected node); Alt+! inverts in the entire path. - - + + @@ -240,8 +240,8 @@ but apply to nodes instead of objects. You can add nodes anywhere on a path by either double clicking or by Ctrl+Alt+click at the desired location. - - + + @@ -253,8 +253,8 @@ selected nodes. The path can be broken (Shift+BShift+J). - - + + @@ -270,8 +270,8 @@ of one of the two handles by hovering your mouse over it, so that only the other rotated/scaled to match. - - + + @@ -281,11 +281,11 @@ retracted, the path segment between them is a straight line. To pull out the ret node, Shift+drag away from the node. - - Subpaths and combining + + Subpaths and combining - - + + @@ -295,12 +295,12 @@ subpath, not all of its nodes are connected.) Below left, three subpaths belong single compound path; the same three subpaths on the right are independent path objects: - - - - - - + + + + + + @@ -310,20 +310,20 @@ will see nodes displayed on all three subpaths. On the right, you can only node- path at a time. - - + + - Inkscape can Combine paths into a compound path -(Ctrl+K) and Break Apart a compound path into + Inkscape can Combine paths into a compound path +(Ctrl+K) and Break Apart a compound path into separate paths (Shift+Ctrl+K). Try these commands on the above examples. Since an object can only have one fill and stroke, a new compound path gets the style of the first (lowest in z-order) object being combined. - - + + @@ -331,9 +331,9 @@ the style of the first (lowest in z-order) object being combined. in the areas where the paths overlap: - - - + + + @@ -341,11 +341,11 @@ in the areas where the paths overlap: commands, see “Boolean operations” below. - - Converting to path + + Converting to path - - + + @@ -357,10 +357,10 @@ nodes. Here are two stars - the left one is kept a shape and the right one is converted to path. Switch to node tool and compare their editability when selected: - - - - + + + + @@ -370,13 +370,13 @@ second one is the result of the Stroke to Path command (black fill, no stroke): - - - - Boolean operations + + + + Boolean operations - - + + @@ -384,89 +384,89 @@ no stroke): boolean operations: - Original shapes - Union (Ctrl++) - Difference (Ctrl+-) - Intersection(Ctrl+*) - Exclusion(Ctrl+^) - Division(Ctrl+/) - Cut Path(Ctrl+Alt+/) - - - - - - - - - - - (bottom minus top) - - + Original shapes + Union (Ctrl++) + Difference (Ctrl+-) + Intersection(Ctrl+*) + Exclusion(Ctrl+^) + Division(Ctrl+/) + Cut Path(Ctrl+Alt+/) + + + + + + + + + + + (bottom minus top) + + The keyboard shortcuts for these commands allude to the arithmetic analogs of the boolean operations (union is addition, difference is subtraction, etc.). The -Difference and Exclusion commands can only apply +Difference and Exclusion commands can only apply to two selected objects; others may process any number of objects at once. The result always receives the style of the bottom object. - - + + - The result of the Exclusion command looks similar to -Combine (see above), but it is different in that -Exclusion adds extra nodes where the original paths intersect. The -difference between Division and Cut Path is that + The result of the Exclusion command looks similar to +Combine (see above), but it is different in that +Exclusion adds extra nodes where the original paths intersect. The +difference between Division and Cut Path is that the former cuts the entire bottom object by the path of the top object, while the latter only cuts the bottom object's stroke and removes any fill (this is convenient for cutting fill-less strokes into pieces). - - Inset and outset + + Inset and outset - - + + Inkscape can expand and contract shapes not only by scaling, but also by offsetting an object's path, i.e. by displacing it perpendicular to the path in each point. The corresponding commands are called -Inset (Ctrl+() and Outset +Inset (Ctrl+() and Outset (Ctrl+)). Shown below is the original path (red) and a number of paths inset or outset from that original: - - - - - - - - - + + + + + + + + + - The plain Inset and Outset commands produce paths + The plain Inset and Outset commands produce paths (converting the original object to path if it's not a path yet). Often, more convenient -is the Dynamic Offset (Ctrl+J) which creates an +is the Dynamic Offset (Ctrl+J) which creates an object with a draggable handle (similar to a shape's handle) controlling the offset distance. Select the object below, switch to the node tool, and drag its handle to get an idea: - - - + + + @@ -475,8 +475,8 @@ does not “degrade” when you change the offset distance again and again. When need it to be adjustable anymore, you can always convert an offset object back to path. - - + + @@ -487,32 +487,32 @@ offset linked to it has black stroke and no fill, the other has black fill and n stroke. - - + + Select the red object and node-edit it; watch how both linked offsets respond. Now select any of the offsets and drag its handle to adjust the offset radius. Finally, note -how moving or transforming the source moves all offset objects linked to it, and how you + how you can move or transform the offset objects independently without losing their connection with the source. - + - - Simplification + + Simplification - - + + - The main use of the Simplify command (Ctrl+L) is + The main use of the Simplify command (Ctrl+L) is reducing the number of nodes on a path while almost preserving its shape. This may be useful for paths created by the Pencil tool, since that tool sometimes creates more nodes than necessary. Below, the left shape is as created by the @@ -521,17 +521,17 @@ nodes, while the simplified one has 17 (which means it is much easier to work wi node tool) and is smoother. - - - - + + + + The amount of simplification (called the threshold) depends on the size of the selection. Therefore, if you select a path along with some larger object, it will be simplified more aggressively than if you select that path -alone. Moreover, the Simplify command is +alone. Moreover, the Simplify command is accelerated. This means that if you press Ctrl+L several times in quick succession (so that the calls are within 0.5 sec from each other), the threshold is increased on each call. (If you do another Simplify after a @@ -539,30 +539,30 @@ pause, the threshold is back to its default value.) By making use of the acceler is easy to apply the exact amount of simplification you need for each case. - - + + - Besides smoothing freehand strokes, Simplify can be used for various + Besides smoothing freehand strokes, Simplify can be used for various creative effects. Often, a shape which is rigid and geometric benefits from some amount of simplification that creates cool life-like generalizations of the original form - melting sharp corners and introducing very natural distortions, sometimes stylish and sometimes plain funny. Here's an example of a clipart shape that looks much nicer after -Simplify: +Simplify: - Original - Slight simplification - Aggressive simplification - - - - - Creating text + Original + Slight simplification + Aggressive simplification + + + + + Creating text - - + + @@ -572,8 +572,8 @@ labels and captions, etc. This section is a very basic introduction into Inkscap text capabilities. - - + + @@ -585,8 +585,8 @@ situations, it may be more convenient than editing it right on the canvas (in particular, that tab supports as-you-type spell checking). - - + + @@ -595,8 +595,8 @@ objects -so you can click to select and position the cursor in any existing text object (such as this paragraph). - - + + @@ -610,12 +610,12 @@ a text object is larger than the default, it will likely benefit from squeezing a bit tighter than the default. Here's an example: - Original - Letter spacing decreased - Inspiration - Inspiration - - + Original + Letter spacing decreased + Inspiration + Inspiration + + @@ -627,8 +627,8 @@ any text string and in any font you will probably find pairs of letters that wil benefit from kerning adjustments. - - + + @@ -638,10 +638,10 @@ of the cursor. Here is the same heading again, this time with manual adjustments for visually uniform letter positioning: - Letter spacing decreased, some letter pairs manually kerned - Inspiration - - + Letter spacing decreased, some letter pairs manually kerned + Inspiration + + @@ -650,9 +650,9 @@ for visually uniform letter positioning: Alt+Up or Alt+Down: - Inspiration - - + Inspiration + + @@ -664,8 +664,8 @@ disadvantage to the “text as text” approach is that you need to have the ori installed on any system where you want to open that SVG document. - - + + @@ -677,11 +677,11 @@ As in Selector, pressing Shift with any produces 10 times greater effect than without Shift. - - XML editor + + XML editor - - + + @@ -694,20 +694,20 @@ interactively, and it allows you to do tricks that would be impossible with regu editing tools. - - Conclusion + + Conclusion - - + + This tutorial shows only a small part of all capabilities of Inkscape. We hope you -enjoyed it. Don't be afraid to experiment and share what you create. Please visit www.inkscape.org for more information, latest +enjoyed it. Don't be afraid to experiment and share what you create. Please visit www.inkscape.org for more information, latest versions, and help from user and developer communities. - + @@ -737,8 +737,8 @@ versions, and help from user and developer communities. - - از ctrl+ جهت بالا برای پیمایش به بالا استفاده کنید + + از ctrl+ جهت بالا برای پیمایش به بالا استفاده کنید -- cgit v1.2.3 From 2da7e6e719adaf4dd4d9bd1eb5544004eae6bb88 Mon Sep 17 00:00:00 2001 From: Nicolas Dufour Date: Sat, 7 Jan 2017 15:35:57 +0100 Subject: [Bug #1651815] share/examples: rescale svgs to 96 dpi - Tutorials Fixed bugs: - https://launchpad.net/bugs/1651815 (bzr r15396) --- share/tutorials/tutorial-advanced.fa.svg | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'share/tutorials/tutorial-advanced.fa.svg') diff --git a/share/tutorials/tutorial-advanced.fa.svg b/share/tutorials/tutorial-advanced.fa.svg index cf2a630c1..085dcb21b 100644 --- a/share/tutorials/tutorial-advanced.fa.svg +++ b/share/tutorials/tutorial-advanced.fa.svg @@ -1,6 +1,6 @@ - + -- cgit v1.2.3