From 44d1206c0e63d47eb87a7e6723bf1028ba16ffdd Mon Sep 17 00:00:00 2001 From: Nicolas Dufour Date: Sat, 27 Aug 2016 12:45:34 +0200 Subject: [Bug #1417923] Fixing issues with titles. Fixed bugs: - https://launchpad.net/bugs/1417923 (bzr r15079) --- share/tutorials/tutorial-tips.it.svg | 774 ++++++++++++++++++----------------- 1 file changed, 404 insertions(+), 370 deletions(-) (limited to 'share/tutorials/tutorial-tips.it.svg') diff --git a/share/tutorials/tutorial-tips.it.svg b/share/tutorials/tutorial-tips.it.svg index e8024c778..8ca58d13d 100644 --- a/share/tutorials/tutorial-tips.it.svg +++ b/share/tutorials/tutorial-tips.it.svg @@ -36,271 +36,274 @@ - - Ctrl+freccia giù per scorrere il documento + + Ctrl+freccia giù per scorrere il documento - + ::TRUCCHI - - + + Questo tutorial dimostrerà vari trucchi che gli utenti hanno imparato nell'uso di Inkscape e qualche caratteristica "nascosta" che può aiutarti a velocizzare la produzione. - - Piazzamento radiale mediante "Cloni in serie" + + Radial placement with Tiled Clones - - + + - It's easy to see how to use the Create Tile Clones dialog for rectangular grids and + It's easy to see how to use the Create Tiled Clones dialog for rectangular grids and patterns. But what if you need radial placement, where objects share a common center of rotation? It's possible too! - - + + - Se il tuo motivo radiale deve avere solo 3,4,6,8 o 12 elementi, puoi provare con le simmetrie P3, P31M, P3M1, P4, P4M, P6, o P6M. Queste funzionano bene per i fiocchi di neve e simili. Un metodo più generale, comunque, è il seguente. + If your radial pattern only needs to have 3, 4, 6, 8, or 12 elements, then you can try the +P3, P31M, P3M1, P4, P4M, P6, or P6M symmetries. These will work nicely for snowflakes +and the like. A more general method, however, is as follows. + - - + + - Scegli la simmetria P1 (traslazione semplice) e allora compensa questa traslazione andando nella scheda Spostamento e impostando a -100% lo spostamento Y per riga e lo spostamento X per colonna. Ora tutti i cloni saranno disposti esattamente sopra l'originale. Tutto ciò che riamane da fare e andare nella scheda Rotazione e impostare un angolo di rotazione per colonna, quindi crea il motivo con una riga e colonne multiple. Per esempio, qui c'è un motivo realizzato con linee orizzontali, con 30 colonne, ognuna ruotata di 6 gradi: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + Scegli la simmetria P1 (traslazione semplice) e allora compensa questa traslazione andando nella scheda Spostamento e impostando a -100% lo spostamento Y per riga e lo spostamento X per colonna. Ora tutti i cloni saranno disposti esattamente sopra l'originale. Tutto ciò che riamane da fare e andare nella scheda Rotazione e impostare un angolo di rotazione per colonna, quindi crea il motivo con una riga e colonne multiple. Per esempio, qui c'è un motivo realizzato con linee orizzontali, con 30 colonne, ognuna ruotata di 6 gradi: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Per avere un quadrante di orologio partendo da questo, tutto ciò che devi fare è togliere o semplicemente sovrapporre la parte centrale con un cerchio bianco (per fare operazioni booleane sui cloni, scollegali prima). - - + + Effetti più interessanti possono essere creati usando sia le righe che le colonne. Qui c'è un motivo con 10 colonne e 8 righe, con rotazione di 2 gradi per riga e 18 per colonna. Ogni gruppo di linee qui è una "colonna", cosi i gruppi sono a 18 gradi l'uno dall'altro; all'interno di ogni colonna, le singole linee sono separate da 2 gradi: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - In the above examples, the line was rotated around its center. But what if you want the -center to be outside of your shape? Just create an invisible (no fill, no stroke) -rectangle which would cover your shape and whose center is in the point you need, group -the shape and the rectangle together, and then use Create Tile Clones on -that group. This is how you can do nice “explosions” or “starbursts” by randomizing -scale, rotation, and possibly opacity: + In the above examples, the line was rotated around its center. But what if you want the +center to be outside of your shape? Just click on the object twice with the Selector tool +to enter rotation mode. Now move the object's rotation center (represented by a small cross-shaped handle) +to the point you would like to be the center of the rotation for the Tiled Clones operation. +Then use Create Tiled Clones on the object. This is how you can do nice “explosions” +or “starbursts” by randomizing scale, rotation, and possibly opacity: - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - How to do slicing (multiple rectangular export areas)? + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + How to do slicing (multiple rectangular export areas)? - - + + Create a new layer, in that layer create invisible rectangles covering parts of your image. Make sure your document uses the px unit (default), turn on grid and snap the rects to the grid so that each one spans a whole number of px units. Assign meaningful -ids to the rects, and export each one to its own file (File +ids to the rects, and export each one to its own file (File > Export PNG Image (Shift+Ctrl+E)). Then the rects will remember their export filenames. After that, it's very easy to re-export some of the rects: switch to the export layer, use Tab to select the one you need (or use Find by id), and @@ -308,40 +311,48 @@ click Export in the dialog. Or, you can write a shell script or batch file to ex all of your areas, with a command like: - - + + inkscape -i area-id -t filename.svg - - + + for each exported area. The -t switch tells it to use the remembered filename hint, otherwise you can provide the export filename with the -e switch. Alternatively, you can -use the Extensions > Web > Slicer extensions, or Extensions > Export > Guillotine for similar results. +use the Extensions > Web > Slicer extensions, or Extensions > Export > Guillotine for similar results. - - Gradienti non-lineari + + Gradienti non-lineari - - + + La versione 1.1 di SVG non supporta i gradienti non-lineari (cioè quelli che hanno una transizione non-lineare tra i colori). Puoi comunque emularli mediante i gradienti multistop. - - + + - Iniziamo con un semplice gradiente a due stop. Apri l'editor dei Gradienti (facendo doppio click su una qualunque maniglia con lo strumento Gradiente). Aggiungi un nuovo passaggio (stop) nel mezzo; spostalo un po'. Allora aggiungi più passaggi prima e dopo il passaggio di mezzo e spostali, in modo che il gradiente risulti liscio. Più stop aggiungi, più liscio puoi rendere il tuo gradiente. Qui trovi il gradiente iniziale bianco-nero con due passaggi: + Start with a simple two-stop gradient (you can assign that in the Fill and Stroke dialog +or use the gradient tool). Now, with the gradient tool, add a new gradient stop in +the middle; either by double-clicking on the gradient line, or by selecting the square-shaped +gradient stop and clicking on the button Insert new stop in the gradient +tool's tool bar at the top. Drag the new stop a bit. Then add more stops before and after the +middle stop and drag them too, so that the gradient looks smooth. The more stops you add, the +smoother you can make the resulting gradient. Here's the initial black-white gradient with two +stops: + @@ -349,11 +360,11 @@ use the Extensions > Web > Slicer - - - + + + - + E qui trovi vari gradienti non-lineari con multistop (analizzali mediante l'editor dei Gradienti): @@ -438,21 +449,21 @@ use the Extensions > Web > Slicer - - - - - - - - - - Gradienti radiali eccentrici + + + + + + + + + + Gradienti radiali eccentrici - - + + - + I gradienti radiali non devono essere necessariamente simmetrici. Con lo strumento Gradiente, sposta con Maiusc la maniglia centrale di un gradiente ellittico. Questo sposterà la maniglia a forma di X del fuoco lontana dal suo centro. Quando non ne hai bisogno, puoi spostare il fuoco nuovamente al centro. @@ -466,42 +477,42 @@ use the Extensions > Web > Slicer - - - - Allineamento al centro della pagina + + + + Allineamento al centro della pagina - - + + - + To align something to the center or side of a page, select the object or group and then -choose Page from the Relative to: list in the +choose Page from the Relative to: list in the Align and Distribute dialog (Shift+Ctrl+A). - - Pulizia del documento + + Pulizia del documento - - + + - + Many of the no-longer-used gradients, patterns, and markers (more precisely, those which you edited manually) remain in the corresponding palettes and can be reused for new -objects. However if you want to optimize your document, use the Clean up Document command in File menu. It will remove any gradients, patterns, or markers +objects. However if you want to optimize your document, use the Clean up Document command in File menu. It will remove any gradients, patterns, or markers which are not used by anything in the document, making the file smaller. - - Proprietà nascoste e l'editor XML + + Proprietà nascoste e l'editor XML - - + + - + The XML editor (Shift+Ctrl+X) allows you to change almost all aspects of the document without using an external text editor. Also, Inkscape usually supports @@ -509,97 +520,96 @@ more SVG features than are accessible from the GUI. The XML editor is one way to access to these features (if you know SVG). - - Cambiare le unità di misura del righello + + Cambiare le unità di misura del righello - - + + - + - In the default template, the unit of measure used by the rulers is px (“SVG user unit”, -in Inkscape it's equal to 0.8pt or 1/90 of the inch). This is also the unit used in + In the default template, the unit of measure used by the rulers is mm. This is also the unit used in displaying coordinates at the lower-left corner and preselected in all units menus. (You can always hover your mouse over a ruler to see the tooltip with the units it uses.) To -change this, open Document Preferences -(Shift+Ctrl+D) and change the Default units on the -Page tab. +change this, open Document Properties +(Shift+Ctrl+D) and change the Display units on the +Page tab. - - Duplicazione veloce + + Duplicazione veloce - - + + - + Per creare molte copie di un oggetto in maniera rapida, prendilo e mentre tieni premuto il pulsante del mouse calca Spazio. Lascerai una sorta di timbro dove e quante volte vorrai. - - Trucchi con lo strumento Penna + + Trucchi con lo strumento Penna - - + + - + Con lo strumento Penna, hai le seguenti opzioni per terminare la tua linea: - - - + + + - + Premere Invio - - - + + + - + Doppio click con il pulsante sinistro del mouse - - - + + + - + - Select the Pen tool from the toolbar + Click with the right mouse button - - - + + + - + Selezionare un altro strumento - - + + - + - Nota che quando il tracciato non è finito (ovvero esso è verde, con l'ultimo segmento in rosso) esso non esiste ancora come oggetto del documento. Perciò, per cancellarlo, usa o Esc (cancella l'intero tracciato) o Backspace (rimuove l'ultimo segmento non concluso) al posto di Annulla nel menù Modifica. + Nota che quando il tracciato non è finito (ovvero esso è verde, con l'ultimo segmento in rosso) esso non esiste ancora come oggetto del documento. Perciò, per cancellarlo, usa o Esc (cancella l'intero tracciato) o Backspace (rimuove l'ultimo segmento non concluso) al posto di Annulla nel menù Modifica. - - + + - + Per aggiungere un nuovo sottotracciato ad un tracciato esistente, seleziona il tracciato e inizia a disegnare premendo Maiusc da un punto arbitrario. Se, comunque, vuoi semplicemente continuare un tracciato esistente, non è necessario premere Maiusc; inizia il disegno da uno dei due punti di ancoraggio del tracciato selezionato. - - Inserire valori Unicode + + Inserire valori Unicode - - + + - + While in the Text tool, pressing Ctrl+U toggles between Unicode and normal mode. In Unicode mode, each group of 4 hexadecimal digits you type becomes a @@ -610,58 +620,70 @@ an em-dash (—). To quit the Unicode mode without inserting anything press Esc. - - + + - + - You can also use the Text > Glyphs dialog to search for and insert + You can also use the Text > Glyphs dialog to search for and insert glyphs into your document. - - Uso della griglia per disegnare icone + + Uso della griglia per disegnare icone - - + + - + - Mettiamo che tu voglia creare una icona 24x24. Crea una pagina di 24x24 px (usa Proprietà Documento) e imposta la griglia a 0.5 px (griglia 48x48). Ora, se tu allinei gli oggetti riempiti alle linee griglia pari, e gli oggetti con contorno a quelle dispari con un contorno di spessore un numero di px pari, e lo esporti con una risoluzione di 90dpi (cosi che 1px diventa 1 pixel bitmap), otterrai un immagine bitmap precisa senza anti-aliasing superfluo. + Suppose you want to create a 24x24 pixel icon. Create a 24x24 px canvas (use the +Document Preferences) and set the grid to 0.5 px (48x48 gridlines). +Now, if you align filled objects to even gridlines, and stroked +objects to odd gridlines with the stroke width in px being an even +number, and export it at the default 96dpi (so that 1 px becomes 1 bitmap pixel), you +get a crisp bitmap image without unneeded antialiasing. + - - Rotazione di oggetti + + Rotazione di oggetti - - + + - + - Con lo strumento Selezione, clicca su un oggetto per mostrare le frecce di ridimensionamento, allora clicca di nuovo sull'oggetto per mostrare quelle di rotazione e slittamento. Se le frecce agli angoli vengono cliccate e spostate, l'oggetto ruoterà attorno al centro (mostrato con un segno a croce). Se premi anche lo Maiusc mentre fai ciò, la rotazione avverrà attorno all'angolo opposto. Puoi anche spostare il punto di rotazione ovunque. + When in the Selector tool, click on an object to see the scaling arrows, +then click again on the object to see the rotation and skew arrows. If +the arrows at the corners are clicked and dragged, the object will rotate around the +center (shown as a cross mark). If you hold down the Shift key while +doing this, the rotation will occur around the opposite corner. You can also drag the +rotation center to any place. + - - + + - + Oppure, puoi ruotare mediante la tastiera premendo [ and ] (di 15 gradi) o Ctrl+[ and Ctrl+] (di 90 gradi). Sempre mediante [] ma con il tasto Alt ruoterà di un pixel. - - Ombre + + Ombre - - + + - + To quickly create drop shadows for objects, use the -Filters > Shadows and Glows > Drop Shadow... feature. +Filters > Shadows and Glows > Drop Shadow... feature. - - + + - + You can also easily create blurred drop shadows for objects manually with blur in the Fill and Stroke dialog. Select an object, duplicate it by Ctrl+D, press @@ -670,53 +692,65 @@ and lower than original object. Now open Fill And Stroke dialog and change Blur say, 5.0. That's it! - - Posizionare un testo su un tracciato + + Posizionare un testo su un tracciato - - + + - + - Per posizionare un testo su un tracciato, seleziona un testo e il tracciato insieme e scegli Metti su tracciato dal menù Testo. Il testo inizierà all'inizio del tracciato. In generale è meglio creare un apposito tracciato che sia adatto al testo, piuttosto che adattare del testo ad un disegno esistente - questo ti darà maggior controllo senza distorcere i tuoi disegni. + Per posizionare un testo su un tracciato, seleziona un testo e il tracciato insieme e scegli Metti su tracciato dal menù Testo. Il testo inizierà all'inizio del tracciato. In generale è meglio creare un apposito tracciato che sia adatto al testo, piuttosto che adattare del testo ad un disegno esistente - questo ti darà maggior controllo senza distorcere i tuoi disegni. - - Selezionare l'originale + + Selezionare l'originale - - + + - + Quando hai un testo su un tracciato, una proiezione collegata, o un clone, il loro oggetto/tracciato sorgente può essere difficile da selezionare perchè esso è esattamente sottostante o reso invisibile e/o bloccato. Il tasto magico Maiusc+D ti aiuterà; seleziona il testo, la proiezione collegata, o il clone e premi Maiusc+D per muovere la selezione verso il corrispondente tracciato, la sorgente della proiezione o il clone originale. - - Recupero di finestre fuori dallo schermo + + Recupero di finestre fuori dallo schermo - - + + - + When moving documents between systems with different resolutions or number of displays, you may find Inkscape has saved a window position that places the window out of reach on your screen. Simply maximise the window (which will bring it back into view, use the task bar), save and reload. You can avoid this altogether by unchecking the global -option to save window geometry (Inkscape Preferences, -Interface > Windows section). +option to save window geometry (Inkscape Preferences, +Interface > Windows section). - - Trasparenze, gradienti e esportare PostScript + + Trasparenze, gradienti e esportare PostScript - - - - - - I formati PostScript o EPS non supportano la trasparenza,quindi non dovrai mai usarla se hai intenzione di esportare in PS/EPS. Nel caso di trasparenza piatta che si sovrappone ad un colore piatto, è facile rimediare: seleziona un oggetto trasparente, seleziona lo strumento Contagocce (F7); assicurati che sia nella modalità "prendi colori senza alfa"; clicca sullo stesso oggetto. Prenderai cosi il colore visibile e lo assegnerai direttamente all'oggetto, ma questa volta senza trasparenza. Ripeti per tutti gli oggetti con trasparenza. Se il tuo oggetto trasparente ricopre parecchie aree di colore piatto, avrai bisogno di dividerlo in pezzi in corrispondenza delle aree e applicare questa procedura per ogni pezzo. + + + + + + PostScript or EPS formats do not support transparency, so you +should never use it if you are going to export to PS/EPS. In the case of flat +transparency which overlays flat color, it's easy to fix it: Select one of the +transparent objects; switch to the Dropper tool (F7 or d); +make sure that the Opacity: Pick button in the dropper tool's tool bar +is deactivated; click on that same object. That will pick +the visible color and assign it back to the object, but this time without +transparency. Repeat for all transparent objects. If your transparent object overlays +several flat color areas, you will need to break it correspondingly into pieces and +apply this procedure to each piece. Note that the dropper tool does not change the opacity +value of the object, but only the alpha value of its fill or stroke color, so make sure that +every object's opacity value is set to 100% before you start out. + - + @@ -746,8 +780,8 @@ option to save window geometry (Inkscape Preference - - Ctrl+freccia sù per scorrere il documento + + Ctrl+freccia sù per scorrere il documento -- cgit v1.2.3