From 44d1206c0e63d47eb87a7e6723bf1028ba16ffdd Mon Sep 17 00:00:00 2001 From: Nicolas Dufour Date: Sat, 27 Aug 2016 12:45:34 +0200 Subject: [Bug #1417923] Fixing issues with titles. Fixed bugs: - https://launchpad.net/bugs/1417923 (bzr r15079) --- share/tutorials/tutorial-tips.nl.svg | 772 ++++++++++++++++++----------------- 1 file changed, 403 insertions(+), 369 deletions(-) (limited to 'share/tutorials/tutorial-tips.nl.svg') diff --git a/share/tutorials/tutorial-tips.nl.svg b/share/tutorials/tutorial-tips.nl.svg index 6c42d360e..9d287619a 100644 --- a/share/tutorials/tutorial-tips.nl.svg +++ b/share/tutorials/tutorial-tips.nl.svg @@ -36,271 +36,274 @@ - Gebruik Ctrl+pijl omlaag om te scrollen + Gebruik Ctrl+pijl omlaag om te scrollen handleiding - + ::TIPS EN TRUCS - - + + Deze handleiding demonstreert verschillende tips en trucs die gebruikers leerden door het gebruik van Inkscape, alsook enkele “verborgen” features die je werk kunnen versnellen. - - Radiale positionering met behulp van Tegelen met klonen + + Radial placement with Tiled Clones - - + + - It's easy to see how to use the Create Tile Clones dialog for rectangular grids and + It's easy to see how to use the Create Tiled Clones dialog for rectangular grids and patterns. But what if you need radial placement, where objects share a common center of rotation? It's possible too! - - + + - Indien je radiaal patroon slechts 3, 4, 6, 8, of 12 elementen bevat, probeer dan P3-, P31M-, P3M1-, P4-, P4M-, P6- of P6M-symmetrie. Deze geven een mooi resultaat voor sneeuwvlokken en dergelijke. Dit is echter een meer algemene methode. + If your radial pattern only needs to have 3, 4, 6, 8, or 12 elements, then you can try the +P3, P31M, P3M1, P4, P4M, P6, or P6M symmetries. These will work nicely for snowflakes +and the like. A more general method, however, is as follows. + - - + + - Kies de P1-symmetrie (eenvoudige verplaatsing) en compenseer vervolgens voor de verplaatsing door naar de tab Verplaatsing te gaan en Per rij / Y-verplaatsing en Per kolom / X-verplaatsing beide op -100% in te stellen. Nu zullen alle klonen exact op het origineel liggen. Alles wat nu nog gedaan moet worden is naar de tab Rotatie te gaan en een rotatie per kolom in te stellen. Creëer vervolgens het patroon met een rij en meerdere kolommen. Hier is bijvoorbeeld een patroon gemaakt uit een horizontale lijn met 30 kolommen en elke kolom geroteerd over 6 graden: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + Kies de P1-symmetrie (eenvoudige verplaatsing) en compenseer vervolgens voor de verplaatsing door naar de tab Verplaatsing te gaan en Per rij / Y-verplaatsing en Per kolom / X-verplaatsing beide op -100% in te stellen. Nu zullen alle klonen exact op het origineel liggen. Alles wat nu nog gedaan moet worden is naar de tab Rotatie te gaan en een rotatie per kolom in te stellen. Creëer vervolgens het patroon met een rij en meerdere kolommen. Hier is bijvoorbeeld een patroon gemaakt uit een horizontale lijn met 30 kolommen en elke kolom geroteerd over 6 graden: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Om hier een wijzerplaat van een klok van te maken is het centrale deel wegsnijden (ontlink eerst de klonen voor booleaanse operaties) of overtekenen met een witte cirkel. - - + + Interessantere effecten kunnen gemaakt worden door van zowel rijen als kolommen gebruik te maken. Hier is een patroon met 10 kolommen en 8 rijen met een rotatie van 2 graden per rij en 18 per kolom. Elke groep lijnen is hier een “kolom” zodat de groepen 18 graden van elkaar liggen, met in elke kolom individuele lijnen die 2 graden uit elkaar liggen: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + - In the above examples, the line was rotated around its center. But what if you want the -center to be outside of your shape? Just create an invisible (no fill, no stroke) -rectangle which would cover your shape and whose center is in the point you need, group -the shape and the rectangle together, and then use Create Tile Clones on -that group. This is how you can do nice “explosions” or “starbursts” by randomizing -scale, rotation, and possibly opacity: + In the above examples, the line was rotated around its center. But what if you want the +center to be outside of your shape? Just click on the object twice with the Selector tool +to enter rotation mode. Now move the object's rotation center (represented by a small cross-shaped handle) +to the point you would like to be the center of the rotation for the Tiled Clones operation. +Then use Create Tiled Clones on the object. This is how you can do nice “explosions” +or “starbursts” by randomizing scale, rotation, and possibly opacity: - + - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Uitsnijden (verschillende rechthoekige exportgebieden) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Uitsnijden (verschillende rechthoekige exportgebieden) - - + + Create a new layer, in that layer create invisible rectangles covering parts of your image. Make sure your document uses the px unit (default), turn on grid and snap the rects to the grid so that each one spans a whole number of px units. Assign meaningful -ids to the rects, and export each one to its own file (File +ids to the rects, and export each one to its own file (File > Export PNG Image (Shift+Ctrl+E)). Then the rects will remember their export filenames. After that, it's very easy to re-export some of the rects: switch to the export layer, use Tab to select the one you need (or use Find by id), and @@ -308,39 +311,47 @@ click Export in the dialog. Or, you can write a shell script or batch file to ex all of your areas, with a command like: - - + + inkscape -i rechthoek-id -t bestandsnaam.svg - - + + for each exported area. The -t switch tells it to use the remembered filename hint, otherwise you can provide the export filename with the -e switch. Alternatively, you can -use the Extensions > Web > Slicer extensions, or Extensions > Export > Guillotine for similar results. +use the Extensions > Web > Slicer extensions, or Extensions > Export > Guillotine for similar results. - - Niet-lineaire kleurverlopen + + Niet-lineaire kleurverlopen - - + + SVG-versie 1.1 ondersteunt geen niet-lineaire kleurverlopen (dit is deze die geen niet-lineaire overgang hebben tussen de kleuren). Je kan deze echter emuleren door multi-stop kleurverlopen. - - + + - Begin met een eenvoudig tweestopskleurverloop. Open de kleurverloop-editor (bijvoorbeeld door te dubbelklikken op een kleurverloophandvat). Voeg een nieuw kleurverloop toe in het midden en versleep het een beetje. Voeg vervolgens meer kleurverlopen toe voor en na de overgang in het midden zodat het verloop vloeiend is. Hoe meer overgangen, hoe vloeiender je het uiteindelijke kleurverloop kan maken. Hier is het initiële zwart-wit kleurverloop met twee stops: + Start with a simple two-stop gradient (you can assign that in the Fill and Stroke dialog +or use the gradient tool). Now, with the gradient tool, add a new gradient stop in +the middle; either by double-clicking on the gradient line, or by selecting the square-shaped +gradient stop and clicking on the button Insert new stop in the gradient +tool's tool bar at the top. Drag the new stop a bit. Then add more stops before and after the +middle stop and drag them too, so that the gradient looks smooth. The more stops you add, the +smoother you can make the resulting gradient. Here's the initial black-white gradient with two +stops: + @@ -348,11 +359,11 @@ use the Extensions > Web > Slicer - - - + + + - + Dit zijn diverse “niet-lineaire” multi-stop kleurverlopen (bekijk ze in de kleurverloop-editor): @@ -437,21 +448,21 @@ use the Extensions > Web > Slicer - - - - - - - - - - Excentrische radiale kleurverlopen + + + + + + + + + + Excentrische radiale kleurverlopen - - + + - + Radiale kleurverlopen moeten niet symmetrisch zijn. Sleep in het kleurverloopgereedschap het centrale handvat van een elliptisch kleurverloop met Shift. Dit verplaatst het x-vormige brandpunt van het kleurverloop uit het centrum. Wanneer je het niet nodig hebt, kan je het brandpunt terugbrengen door het dichtbij het middelpunt te slepen. @@ -465,191 +476,202 @@ use the Extensions > Web > Slicer - - - - Uitlijnen naar het midden van de pagina + + + + Uitlijnen naar het midden van de pagina - - + + - + To align something to the center or side of a page, select the object or group and then -choose Page from the Relative to: list in the +choose Page from the Relative to: list in the Align and Distribute dialog (Shift+Ctrl+A). - - Document opruimen + + Document opruimen - - + + - + Many of the no-longer-used gradients, patterns, and markers (more precisely, those which you edited manually) remain in the corresponding palettes and can be reused for new -objects. However if you want to optimize your document, use the Clean up Document command in File menu. It will remove any gradients, patterns, or markers +objects. However if you want to optimize your document, use the Clean up Document command in File menu. It will remove any gradients, patterns, or markers which are not used by anything in the document, making the file smaller. - - Verborgen features en de XML-editor + + Verborgen features en de XML-editor - - + + - + De XML-editor laat je toe om bijna alle aspecten van het document te bewerken zonder een externe tekstbewerker. Bovendien ondersteunt Inkscape dikwijls meer features dan dat er toegankelijk zijn via de GUI. De XML-editor is een manier om toegang te krijgen tot deze features, indien je SVG kent. - - Aanpassen van de eenheid van de liniaal + + Aanpassen van de eenheid van de liniaal - - + + - + - In the default template, the unit of measure used by the rulers is px (“SVG user unit”, -in Inkscape it's equal to 0.8pt or 1/90 of the inch). This is also the unit used in + In the default template, the unit of measure used by the rulers is mm. This is also the unit used in displaying coordinates at the lower-left corner and preselected in all units menus. (You can always hover your mouse over a ruler to see the tooltip with the units it uses.) To -change this, open Document Preferences -(Shift+Ctrl+D) and change the Default units on the -Page tab. +change this, open Document Properties +(Shift+Ctrl+D) and change the Display units on the +Page tab. - - Stempelen + + Stempelen - - + + - + Om snel meerdere kopieën van een object te maken, kan je stempelen. Sleep een object (of schaal of roteer het) en tijdens het ingedrukt houden van de linkermuisknop, druk je op de Spatiebalk. Dit maakt een stempel van de huidige objectvorm. Je kan het zo vaak herhalen als je wil. - - Trucken met de pen + + Trucken met de pen - - + + - + In het pengereedschap (Bezier), heb je de volgende mogelijkheden om een lijn te beëindigen: - - - + + + - + Drukken op Enter - - - + + + - + Dubbelklikken met de linkermuisknop - - - + + + - + - Select the Pen tool from the toolbar + Click with the right mouse button - - - + + + - + Een ander gereedschap selecteren - - + + - + - Noteer dat terwijl het pad nog niet beëindigd is (dit is getoond in groen en het huidige segment rood), het nog niet bestaat als object in het document. Bijgevolg gebruik je om het te annuleren op Esc (volledige pad annuleren) of Backspace (het laatste segment verwijderen) in plaats van Ongedaan maken. + Noteer dat terwijl het pad nog niet beëindigd is (dit is getoond in groen en het huidige segment rood), het nog niet bestaat als object in het document. Bijgevolg gebruik je om het te annuleren op Esc (volledige pad annuleren) of Backspace (het laatste segment verwijderen) in plaats van Ongedaan maken. - - + + - + Om een nieuw subpad aan een bestaand pad toe te voegen, selecteer je dat pad en begin je te tekenen met Shift van een willekeurig punt. Indien je echter eenvoudigweg wil voortgaan met een bestaand pad, is Shift niet nodig; begin dan te tekenen vanaf een van de uiteinden. - - Ingeven van Unicode tekens + + Ingeven van Unicode tekens - - + + - + In het tekstgereedscap schakelt Ctrl+U tussen Unicode en normale modus. In Unicode modus wordt elke groep van 4 hexadecimale cijfers die je ingeeft een enkel Unicode karakter. Dit laat je toe om arbitraire symbolen in te geven (zolang je de Unicode waarden kent en het lettertype deze ondersteunt). Om Unicode-invoer te beëindigen, druk je op Enter. Bijvoorbeeld, Ctrl+U 2 0 1 4 Enter voegt een liggend streepje (—) in. Om de Unicode modus te verlaten zonder iets in te voegen, druk je op Esc. - - + + - + - You can also use the Text > Glyphs dialog to search for and insert + You can also use the Text > Glyphs dialog to search for and insert glyphs into your document. - - Het raster gebruiken voor het tekenen van iconen + + Het raster gebruiken voor het tekenen van iconen - - + + - + - Veronderstel dat je een 24x24 pixel icoon wil maken. Creëer een 24x24 px canvas (gebruik de Documenteigenschappen) en stel het raster in op 0.5px (48x48 rasterlijnen). Indien je nu gevulde objecten uitlijnd op even rasterlijnen, contouren op oneven rasterlijnen met een lijnbreedte een even nummer in px en exporteert op de standaard 90ppi resolutie (opdat 1 px 1 bitmap pixel wordt), verkrijg je een scherp beeld zonder dat anti-aliasing nodig is. + Suppose you want to create a 24x24 pixel icon. Create a 24x24 px canvas (use the +Document Preferences) and set the grid to 0.5 px (48x48 gridlines). +Now, if you align filled objects to even gridlines, and stroked +objects to odd gridlines with the stroke width in px being an even +number, and export it at the default 96dpi (so that 1 px becomes 1 bitmap pixel), you +get a crisp bitmap image without unneeded antialiasing. + - - Objectrotatie + + Objectrotatie - - + + - + - In het selectiegereedschap klik je op een object om de schaalhandvatten te tonen. Klik dan opnieuw op het object om de handvatten voor rotatie en scheeftrekken te tonen. Indien je op de handvatten op de hoeken klikt en sleept draait het object rond het centrum (kruisteken). Indien je tegelijkertijd Shift ingedrukt houdt, wordt geroteerd rond de tegenovergestelde hoek.Je kan ook het rotatiecentrum naar gelijk welke plaats slepen. + When in the Selector tool, click on an object to see the scaling arrows, +then click again on the object to see the rotation and skew arrows. If +the arrows at the corners are clicked and dragged, the object will rotate around the +center (shown as a cross mark). If you hold down the Shift key while +doing this, the rotation will occur around the opposite corner. You can also drag the +rotation center to any place. + - - + + - + Je kan ook roteren met het toetsenbord met [ en ] (per 15 graden) of Ctrl+[ en Ctrl+] (per 90 graden). Dezelfde [] toetsen met Alt zorgen voor pixelgrootte rotatie. - - Slagschaduwen + + Slagschaduwen - - + + - + To quickly create drop shadows for objects, use the -Filters > Shadows and Glows > Drop Shadow... feature. +Filters > Shadows and Glows > Drop Shadow... feature. - - + + - + You can also easily create blurred drop shadows for objects manually with blur in the Fill and Stroke dialog. Select an object, duplicate it by Ctrl+D, press @@ -658,53 +680,65 @@ and lower than original object. Now open Fill And Stroke dialog and change Blur say, 5.0. That's it! - - Tekst op een pad plaatsen + + Tekst op een pad plaatsen - - + + - + - Om tekst op een pad te plaatsen, selecteer je de tekst en de curve en kies je Op pad plaatsen in het menu Tekst. De tekst zal starten bij het begin van het pad. Algemeen is het best om een expliciet pad te maken waaraan je de tekst wil fitten in plaats van het te fitten op een andere object — dit geeft je meer controle zonder je afbeelding om zeep te helpen. + Om tekst op een pad te plaatsen, selecteer je de tekst en de curve en kies je Op pad plaatsen in het menu Tekst. De tekst zal starten bij het begin van het pad. Algemeen is het best om een expliciet pad te maken waaraan je de tekst wil fitten in plaats van het te fitten op een andere object — dit geeft je meer controle zonder je afbeelding om zeep te helpen. - - Het origineel selecteren + + Het origineel selecteren - - + + - + Wanneer je tekst op een pad hebt, een gekoppelde rand of een kloon, kan het moeilijk zijn om het bronobject/-pad te selecteren, omdat het er direct onder kan liggen, onzichtbaar kan zijn of vergrendeld. De magische toets Shift+D helpt hierbij; selecteer de test, gekoppelde rand of kloon en druk Shift+D om het corresponderende originele pad, rand of kloon te selecteren. - - Indien het venster niet op het scherm staat + + Indien het venster niet op het scherm staat - - + + - + When moving documents between systems with different resolutions or number of displays, you may find Inkscape has saved a window position that places the window out of reach on your screen. Simply maximise the window (which will bring it back into view, use the task bar), save and reload. You can avoid this altogether by unchecking the global -option to save window geometry (Inkscape Preferences, -Interface > Windows section). +option to save window geometry (Inkscape Preferences, +Interface > Windows section). - - Transparantie, kleurverlopen en PostScript export + + Transparantie, kleurverlopen en PostScript export - - - - - - PostScript of EPS formaten ondersteunen geen transparency zodat je dit nooit zou mogen gebruiken indien je het naar PS/EPS gaat exporteren. In het geval van een egale transparantie over een egaal kleurvlak is het eenvoudig op te lossen: selecteer een van de transparante objecten, schakel over naar de pipet (F7); zorg dat je in de modus “Zowel kleur als alfa onder de cursor nemen” bent, klik vervolgens op het geselecteerde object. Zo wordt de zichtbare kleur genomen en terug toegekend aan het object, maar dan zonder transparantie. Herhaal dit voor alle transparante objecten. Indien je transparant object over verschillende egale kleurvlakken ligt, moet je het in de overeenkomstige delen opbreken en de procedure voor elk deel toepasen. + + + + + + PostScript or EPS formats do not support transparency, so you +should never use it if you are going to export to PS/EPS. In the case of flat +transparency which overlays flat color, it's easy to fix it: Select one of the +transparent objects; switch to the Dropper tool (F7 or d); +make sure that the Opacity: Pick button in the dropper tool's tool bar +is deactivated; click on that same object. That will pick +the visible color and assign it back to the object, but this time without +transparency. Repeat for all transparent objects. If your transparent object overlays +several flat color areas, you will need to break it correspondingly into pieces and +apply this procedure to each piece. Note that the dropper tool does not change the opacity +value of the object, but only the alpha value of its fill or stroke color, so make sure that +every object's opacity value is set to 100% before you start out. + - + @@ -734,8 +768,8 @@ option to save window geometry (Inkscape Preference - - Gebruik Ctrl+pijl omhoog om te scrollen + + Gebruik Ctrl+pijl omhoog om te scrollen -- cgit v1.2.3