Unless noted otherwise, keypad keys (such as arrows, Home, End, +, -, digits) are supposed to work the same as corresponding regular keys. If you have a new shortcut idea, please contact the developers (by writing to the devel mailing list or by submitting an RFE).

*
s Auswahlwerkzeug Auswahlwerkzeug (temporär) Space switches to the Selector tool temporarily; another Space switches back. n Knotenwerkzeug z Zoomwerkzeug r Rechteckwerkzeug e Ellipsenwerkzeug p Malwerkzeug (Freihandlinien) b Zeichenwerkzeug (Linien und Bézierkurven c Kalligrafiewerkzeug g Farbverlaufswerkzeug d Farbpipette t Textwerkzeug i Spiralwerkzeug * Sternwerkzeug o Objektverbinder Doppel-Klick auf die Werkzeug-Schaltflächen öffnet den Einstellungsdialog mit der Seite, die dem entsprechenden Werkzeug entspricht.
*
F Füllung und Kontur W Farbfelder-Palette T Schrift und Text M Verändern A Anordungen und Abstände O Objekteigentschaften X XML-Editor D Dokumenteneinstellungen P Inkscape-Einstellungen E Bitmap exportieren F Suchen B Bitmap vektorisieren Diese öffnen einen neuen Dialog, wenn dieser noch nicht geöffnet wurde. Andererseits erhält der entsprechende Dialog den Fokus. Toggle visibility toggle dialogs This temporarily hides all open dialogs; another F12 shows them again. Innerhalb eines Dialoges Zurück zur Arbeitsfläche W Dialog schliesen springe zum nächsten Element springe zum vorhergehenden Element Setzten der neuen Werte Dieses übernimmt die neuen Werte die sie eingegeben haben und kehrt zur Arbeitsfläche zurück. im XML-Editor, setzen des "attr"-Wertes Beim Bearbeiten eines Attribut-Wertes im XML-Editor, setzten des neuen Wertes (entspricht dem Klicken des "Setzen"-Knopfes). Aktiviert den aktuellen Knopf oder Liste in einem Dialog mit mehreren Reitern, wechseln des reiters
*
Die Werkzeugeinstellungsleiste über dem Dokument bietet veschiedene Knöpfe und Einsteller für jedes Werkzeug. X springe zum ersten Eingabefeld bestätigt den neuen Wert Das bestätigt den neuen Wert, den Sie gerade in einem Textfeld eingegeben haben und kehrt zur Arbeitsfläche zurück. abbrechen der Änderungen und Rückkehr zur Arbeitsfläche Dieses bricht die Änderungen, die Sie in einem textfeld gemacht haben ab und kehrt zur Arbeitsfläche zurück. Z Änderungen abbrechen Dieses bricht die Änderungen, die Sie in einem textfeld gemacht haben ab aber Sie verbleiben in diesem Textfeld. springe zum nächsten Feld springe zum verhergehenden Feld Benutze dieses zum Navigieren zwischen den Feldern in der Werkzeugeinstellungsleiste (die Werte in den Feldern, die Sie verlassen, werden übernommen sofern Sie diese geändert haben). Ändern von Werten verändert den Wert um 0,1 verändert den Wert um 5,0
*
Zoom = + vergrössern - verkleinern Die Tasten +/- auf der Nummerntastatur vergrössern/verkleinern auchwenn Sie einen Text editieren, sofern nicht "NumLock" eingeschaltet ist. vergrössern verkleinern vergrössern bzw. verkleinern vergrössern des Bereiches zoom into the area Z aktiviert Zoom-Feld Das Zoom-Feld in der unteren linken Ecke des Fensters erlaubt das präziese Festlegen des Zoom-Wertes. Voreingestellte Zoom-Stufen 1 Zoomfaktor 1:1 2 Zoomfaktor 1:2 3 Auswahl in das Fenster einpassen 4 Zeichnung in das Fenster einpassen 5 Seite in das Fenster einpassen E6 Seitenbreite in das Fenster einpassen Liste bisheriger Zoom-Faktoren ` (Backquote) vorheriger Zoomfaktor ` nächster Zoomfaktor Mit diesen Tasten können Sie vor- und rückwärts in der Liste der bisherigen Zoomfaktoren gehen Rollen (Verschieben) rollt die Arbeitsfläche Rollen mittels tasten ist beschleunigt, d.h. es verschnellert sich, wenn Sie Strg+Pfeil in schneller Folge drücken bzw. gedrückt lassen. rollt die Arbeitsfläche rollt die Arbeitsfläche rollt die Arbeitsfläche vertikal rollt die Arbeitsfläche horizontal Hilfslinien und Gitter drag off a ruler to create guide Drag off the horizontal or vertical ruler to create a new guideline. Drag a guideline onto the ruler to delete it. | \ Hilfslinien und Einrasten an Hilfslinien umschalten Wenn Sie unterschiedliche Werte für Sichtbarkeit und Einrasten an Hilfslinien maben möchten, dann setzen Sie diese im Dokumenteneinstellungen Dialog. When you create a new guide by dragging off the ruler, guide visibility and snapping are turned on. # 3 Gitter und Einrasten an Gitter umschalten Wenn Sie unterschiedliche Werte für Sichtbarkeit und Einrasten an Gitter maben möchten, dann setzen Sie diese im Dokumenteneinstellungen Dialog. Note that only the 3 key on the main keyboard works, not on the keypad.
*
N neues Dokument anlegen O ein bestehendes Dokument öffnen E als Bitmap exportieren I Bitmap oder SVG-Bild importieren P Dokument drucken S Dokument speichern S Dokument unter anderen Namen speichern Q Inkscape verlassen
*
R Lineale umschalten B Rollbalken umschalten Vollbildmodus umschalten Hauptmenü Menüeinträge können auch durch das Drücken von Alt und dem im Menünamen unterstrichenen Buchstaben aktiviert werden. drop-down (context) menu W Dokument schliessen Beendet Inkscape, wenn nur ein Dokument geöffnet ist. zum nächsten Dokumentenfenster zum vorhergehenden Dokumentenfenster Es werden die aktiven Dokumentenfenster vor- und rückwarts durchlaufen.
*
zur darüberliegenden Ebene verschieben zur darunterliegenden Ebene verschieben Es werden die ausgewählten Objekte von einer in eine andere Ebene verschoben. Ebene anheben Ebene absenken Ebene ganz nach oben Ebene ganz nach unten These commands move the current layer among its siblings (normally other layers).
*
Rückgängig/Wiederholen Y Z Rückgängig Z Y Wiederholen Zwischenablage C Auswahl kopieren Einfügen einer Kopie der Auswahl in die Inkscape Zwischenablage. Text eines Textobjektes wird auch in die Zwischenablage übernommen. X Auswahl verschieben Funktioniert wie "Auswahl kopieren", jodoch wird die Auswahl im Dokument gelöscht. V Zwischenablage einfügen Einfügen der Objekte aus der Zwischenablage an der Mausposition oder in der Mitte des Dokumentes, wenn sich die Mausposition ausserhalb der Zeichenfläche befindet. Beim Bearbeiten von Text mit dem Textwerkzeug wird der Text aus der System-Zwischenablage in das aktuelle Textobjekt eingefügt. V Einfügen an Ursprungsposition Fügt die Objekte der Zwischenablage an der Position ein, von der sie kopiert wurden. V Stil anwenden Anwenden des Stils des (zuerst) kopierten Objektes auf die aktuelle Auswahl. If a gradient handle (in Gradient tool) or a text span (in Text tool) are selected, they get the style instead of the entire object. Duplizieren D Auswahl duplizieren Neue Objekte werden ganau über den Originalen eingefügt und ausgewählt. Klonen D Auswahl klonen Ein Klon kann unabhängig verschoben, skaliert, rotiert und geschert werden aktualisiert Form, Füllung und Kontour von seinem Original. Der Klon wird genau über dem Original eingefügt und ausgewählt. You can only clone one object at a time; if you want to clone several objects together, group them and clone the group. D Klonverbindung auflösen Durch das Auflösen der Klonverbindung verliert der Klon jeden Bezug zu seinem Original und wird zur exakten Kopie. D Original auswählen Klon auswählen, um das Original zu finden. Das Original wird selektiert. Bitmap B Kopie als Bitmap This exports the selected object(s) (all other objects hidden) as PNG in the document's directory and imports it back. The imported bitmap is placed over the original selection and is selected. B Bitmap vektorisieren Öffnet den Bitmap vektorisieren Dialog mit dem Sie ein Bitmap in ein oder mehrere Pfade umwandeln können. Füllmuster I Objekte in Füllmuster umwandeln This converts the selection to a rectangle with tiled pattern fill. I Füllmuster in Objekte umwandeln Each selected object with pattern fill is broken into the same object without fill and a single pattern object. Gruppieren U G asgewählte Objekte gruppieren Strg+Klick um Objekte innerhalb einer Gruppe auszuwählen. G U Asgewählte Gruppe(n) auflösen This removes only one level of grouping; press Ctrl+U repeatedly to ungroup nested groups. Z-Tiefe Auswahl ganz nach oben anheben Auswahl ganz nach unten anheben Auswahl eine Stufe anheben Auswahl eine Stufe absenken
*
In Pfad umwandeln C umwandeln ausgewählter Objekte in Pfade C Kontur in Pfad umwandeln Boole'sche Operation + Vereinigung Vereinigung verknüpft mehrere Pfade so, dass ein einziger Pfad ohne Überschneidungen entsteht. - Differenz Differenz verknüpft genau 2 Objekte so, dass das Obere vom Unteren abgezogen wird. * Intersektion Intersektion erzeugt einen Pfad, der den gemeinsamen (überlappenden) Bereich aller Objekte darstellt. ^ Exklusiv-Oder (Ausschluss) Ausschluss ist ähnlich zur Vereinigung is similar to Union, arbeitet jedoch nur mit genau 2 Objekten und entfernt überlappende Bereiche. / Division Division erzeugt mehrere Objekte; Den überlappenden Bereich aller Objekte und den ausgeschlossenen Bereich des unteren Objektes. / Pfad zerschneiden Zerschneidet die Konturlinie des unteren Objektes an den Überschneidungen mit dem oberen Objekt. Die Füllung wird entfernt. Das Ergebnis von Vereinigung, Differenz, Intersektion und Ausschluss erbt das "id"-Attribut und so auch die Klone des unteren Objektes. Division und Zerschneiden erzeugen normalerweise mehrere Pfade, von denen ein zufälliger das "id"-Attribut des unteren Objektes erbt. Offsets ( inset path (towards center) ) outset path (away from center) The default offset distance is 2 px (SVG pixel units, not screen pixels). ( inset path by 1 pixel ) outset path by 1 pixel ( inset path by 10 pixels ) outset path by 10 pixels The actual distance for pixel offsets depends on zoom level. Zoom in for finer adjustment. All the (, ) commands convert the object to path, if necessary, and produce regular path. J create dynamic offset J create linked offset These commands produce an offset object, editable by the node tool, standalone or linked to the original. D select source Selecting a linked offset and giving this command will select the source path of the linked offset. Kombinieren K Pfade kombinieren Im Unterschied zum Gruppieren wird genau ein Objekt erzeugt. Im Unterschied zur Vereinigung werden Überlappungen nicht verändert. Ob überlappende Bereiche gefüllt werden, hängt von den Einstellungen im Dialog "Füllung und Kontur" ab. K Pfade zerlegen Versucht einen Pfad in Unterpfade zu zerlegen. Funktioniert nicht an einem einzelnen geschlossenem Pfad. Vereinfachen L Vereinfachen Dieses Kommando versucht die selektierten Pfade durch Entfernen überflüssiger Knoten zu vereinfachen. Objekte werden zuerst in Pfade umgewandelt. Wird diese Operation mehrmals schnell hintereinander ausgeführt, erhöht sich die Stärke kurze Pause dazwischen setzt die Stärke wieder zurück. (einstellbar im "Inkscape-Einstellungen" Dialog).
*
Tastaturkommandos zur Auswahl nächstes Object selektieren vorheriges Objekt selektieren Diese Tasten wählen die Objekte nach deren Z-Tiefe (Tab von unten nach oben, Umsch+Tab von oben nach unten). Sofern Sie nicht manuelle Umordnungen gemacht haben, ist das zulezt erstellte Objekt ganz oben. Als Ergebnis, falls nichts selektiert ist, selektiert das einmalige Drücken von Umsch+Tab das zuletzt erzeugte Objekt. Das funktioniert an Objekten in der aktuellen Ebene (falls Sie das nicht in den Einstellungen geändert haben). A Alles selektieren (aktuelle Ebene) Das funktioniert an Objekten der aktuellen Ebene (falls Sie das nicht in den Einstellungen geändert haben). A Alles selektieren (alle Ebenen) Das funktioniert an allen Objekten in allen sichtbaren und entsperrten Ebenen. ! Auswahl invertieren (aktuelle Ebene) Auswahl invertieren (alle ausgewählten Objekte deselektieren und alle anderen auswählen) in aktueller Ebene. ! Auswahl invertieren (alle Ebenen) Auswahl invertieren (alle ausgewählten Objekte deselektieren und alle anderen auswählen) in sichbaren und entsperrten Ebenen. Auswahl aufheben Auswahl löschen Verschieben mittels Tastatur Auswahl verschieben um Mindestschrittweite Auswahl verschieben um 10-fache Mindestschrittweite. Die Mindestschrittweite beträgt 2px (SVG Pixel-Einheiten, nicht Bildschirm Pixel). Auswahl verschieben um 1 pixel Auswahl verschieben um 10 Pixel Die Schrittweite in Pixel hängt vom aktuellen Grössenfaktor ab. Vergrössern Sie für kleinere Schrittweiten. Vergrössern mittels Tastatur. > Auswahl vergrössern um eine Stufe , < Auswahl verkleinern um eine Stufe Die Standard-Vergrösserungsstufe beträgt 2 px(SVG Pixel Einheiten, nicht Bildschirm pixel). . > Auswahl vergrössern auf 200% , < Auswahl verkleinern auf 50% . > Auswahl vergrössern um 1 Pixel , < Auswahl verkleinern um 1 Pixel Der Vergrößerungsschritt hängt von der Vergrößerung ab. Vergrössern sie für kleinere Schrittweite. Die Vergrösserung ist gleichmässig um das Zentrum, so dass der Vergrößerungsschritt auf die grössere der zwei Dimensionen angewendet wird. Drehen mittels Tastatur [ ] Auswahl drehen um Winkel Schrittweite Die Standard Winkel-Schrittweite beträgt 15 Grad. ] dreht im Uhrzeigersinn, [ dreht entgegen. [ ] Auswahl drehen um 90 Grad [ ] Auswahl drehen um 1 Pixel Der Winkel für die Drehung um ein Pixel hängt vom aktuellen Größenfaktor ab. Vergrößern sie für feinere Winkel. Spiegeln mittels Tastatur h Auswahl horizontal spiegeln v Auswahl vertikal spiegeln Auswahl mittels Maus Objekt auswählen Beim Links-Klicken auf ein Objekt, wird die vorherige Auswahl aufgehoben. Auswahl umschalten Umsch+Klick fügt ein Objekt der aktuellen Auswahl hinzu oder, falls es schon ausgewählt war, entfernt es von dieser. Objekt bearbeiten Bei Pfaden schaltet Doppel-Klicken in das Knotenwerkzeug, bei Formen in das entsprechende Formenwerkzeug, bei Text in das Textwerkzeug. Bei Gruppen bewirkt Doppel-Klicken das "Gruppe bearbeiten"-Kommano (die Gruppe wird eine vorübergehende Ebene). Doppel-Klicken in einem leeren Bereich schaltet wieder in die übergeordnete Ebene zurück. Auswahl innerhalb einer Gruppe und verdeckter Objekte Auswahl innerhalb einer Gruppe Strg+Klick selektiert das Objekt an diesem Punkt ungeachtet jeglicher Gruppierungen zu dem das Objekt gehören könnte. Auswahl innerhalb der Gruppe umschalten Auswahl verdeckter Objekte Alt+Klick selektiert das Objekt an diesem Punkt, das sich unterhalb (in der Z-Tiefe) des untersten selektierten an diesem Punkt befindlichen Objekt befindet. Wenn das unterste Objekt erreicht ist, selektiert Alt+klick wieder das oberste Objekt. Durch das mehrfache betätigen von Alt+klick, werden die Objekte an diesem Punkt in Z-Tiefe immer wieder durchlaufen. Bei Linux kann Alt+Klick und Klicken+Ziehen durch den Fenster Manager reserviert sein. Stellen Sie ihn so ein, dass sie diese unter inkscape benutzen können. Umschalten verdeckter Objekte select under, in groups toggle under, in groups enter group go to parent group Rubberband select multiple objects Dragging around objects does "rubberband" selection; previous selection is deselected. add objects to selection Normally, you need to start from an empty space to initiate a rubberband. However, if you press Shift before dragging, Inkscape will do rubberband selection even if you start from an object. Mouse move select + move Dragging an object selects it if it was not selected, then moves selection. move selected Alt+drag moves the current selection (without selecting what is under cursor), no matter where you start the drag. On Linux, Alt+click and Alt+drag may be reserved by the window manager. Reconfigure it so you can use them in Inkscape. restrict movement to horizontal or vertical temporarily disable snapping This temporaily disables snapping to grid or guides when you are dragging with grid or guides on. drop a copy When dragging or transforming with mouse, each Space leaves a copy of the selected object. You can press and hold Space while dragging for a nice "trail." Mouse transform toggle scale/rotation handles scale (scale handles) rotate or skew (rotation handles) Scale handles scale preserving aspect ratio symmetric transformation Holding Shift while transforming makes transformation symmetric around the center of the selection. slow movement Holding Alt while transforming makes transformation lag behind mouse movement, allowing finer changes. Rotation handles snap skew angle Holding Ctrl when dragging a skew (non-corner) handle snaps the skew angle to angle steps (default 15 degrees). snap rotation angle Holding Ctrl when dragging a rotation (corner) handle snaps the rotation angle to angle steps (default 15 degrees). Cancel cancel rubberband, move, transformation Press Esc while mouse button is still down to cancel rubberband selection, move, or transformation of any kind.
*
Keyboard select select next node select previous node These keys select nodes within the selected path A select all nodes in subpath(s) If the path has multiple subpaths and some nodes selected, this selects all only in subpaths with already selected nodes. A select all nodes in path This selects all nodes in the entire path. ! invert selection in subpath(s) If the path has multiple subpaths and some nodes selected, this inverts selection only in subpaths with already selected nodes. ! invert selection in path This inverts selection (deselects what was selected and vice versa) in the entire path. deselect all nodes Keyboard move move selected node(s) by the nudge distance move selected node(s) by 10x nudge distance The default nudge distance is 2 px (SVG pixel units, not screen pixels). move selected node(s) by 1 pixel move selected node(s) by 10 pixels The actual distance for pixel movements depends on zoom level. Zoom in for finer movement. Keyboard handle scale (1 node selected) < > contract/expand both handles by scale step The default scale step is 2 px (SVG pixel units, not screen pixels). May apply to more than one node. < > scale left handle by the scale step < > scale right handle by the scale step < > scale left handle by 1 pixel < > scale right handle by 1 pixel The actual size increment for pixel scaling depends on zoom level. Zoom in for finer scaling. Instead of the < and > keys, you can use the , (comma) and . (period) keys respectively. Keyboard handle rotate (1 node selected) [ ] rotate both handles by the angle step The default angle step is 15 degrees. ] rotates clockwise, [ rotates counterclockwise. May apply to more than one node. [ ] rotate left handle by the angle step [ ] rotate right handle by the angle step [ ] rotate left handle by 1 pixel [ ] rotate right handle by 1 pixel Keyboard scale (>1 nodes selected) These commands scale the selected nodes as if they were an "object", around the center of that object. . > scale nodes up by the scale step , < scale nodes down by the scale step The default scale step is 2 px (SVG pixel units, not screen pixels). . > scale nodes up by 1 pixel , < scale nodes down by 1 pixel The actual size increment for pixel scaling depends on zoom level. Zoom in for finer scaling. Scaling is uniform around the center, so that the size increment applies to the larger of the two dimensions. Keyboard rotate (>1 nodes selected) These commands rotate the selected nodes as if they were an "object", around the center of that object. [ ] rotate nodes by the angle step The default angle step is 15 degrees. ] rotates clockwise, [ rotates counterclockwise. [ ] rotate nodes by 1 pixel The actual angle for pixel rotation depends on zoom level. Zoom in for finer movement. Keyboard flip (>1 nodes selected) These commands flip the selected nodes as if they were an "object", around the center of that object. h flip nodes horizontally v flip nodes vertically Change segment(s) L make line U make curve These commands require that more than two adjacent nodes be selected. Change node type C make cusp S make smooth Y make symmetric toggle smooth/cusp/symmetric Join/break J join selected nodes This requires that exactly two end nodes within the path be selected. B break selected node(s) After break, only one of each two new nodes is selected. May apply to more than one node. Delete, create, duplicate delete selected node(s) create/delete node Ctrl+Alt+click on a node deletes it; Ctrl+Alt+click on the path between nodes creates a new node in the click point. create node Double clicking on the path between nodes creates a node in the click point. insert new node(s) This adds new node(s) in the middle(s) of selected segment(s), so it requires that more than two adjacent nodes be selected. D duplicate selected node(s) New nodes are created on the same path; they are placed exactly over the old ones and are selected. Mouse select: objects click a non-selected object to select select under toggle selection These work the same as in Selector. The nodes or handles of the single selected object become editable. Mouse select: nodes select a node Clicking on a node selects it. select two adjacent nodes Clicking on a selected path between the nodes selects the two nodes closest to the click point. toggle selection This adds/removes a node (if clicked on node) or two nodes (if clicked on path) to/from the node selection. deselect Clicking in an empty space deselects all selected nodes. Next click will deselect the object. Rubberband select multiple nodes Dragging around nodes does "rubberband" selection; previous node selection is deselected. add nodes to selection Normally, you need to start from a point not over a path or a node to initiate a rubberband. However, if you press Shift before dragging, Inkscape will do rubberband selection even if you start over the path. Node move (mouse) move selected nodes restrict movement to horizontal or vertical move along handles This restricts movement to the directions of the node's handles, their continuations and perpendiculars (total 8 snaps). If the node has straight lines on one or both sides, this will snap it to these lines' directions and perpendiculars instead. temporarily disable snapping Snapping nodes is enabled in Document Preferences. By default, only bounding box of objects snaps to grid/guides. drag out handle If a node has a retracted handle, dragging with Shift lets you drag it out of the node. drop a copy When dragging nodes with mouse, each Space leaves a copy of the selected object. You can press and hold Space while dragging for a nice "trail." Node handles move a node handle snap the handle to angle steps The default angle step is 15 degrees. This also snaps to the handle's original angle, its continuation and perpendiculars. rotate both handles lock the handle length Ctrl, Shift, Alt can be combined when dragging handles. retract the handle Retracted handle is zero length; use Shift+drag to drag it back out. Reversing r reverse path direction Editing shapes Node tool can also drag the handles of shapes (rectangles, ellipses, stars, spirals). Click on a shape to select it. See the corresponding shape tools for their editing shortcuts, all of which also work in node tool. Cancel cancel rubberband or move Press Esc while mouse button is still down to cancel rubberband selection, node move, handle move, or handle move.
*
Drawing draw a rectangle make a square or integer-ratio rectangle This restricts rectangle so its height/width ratio is a whole number. draw around the starting point This creates a rectangle symmetric around the starting point of the mouse drag. Editing click an object to select select under toggle selection drag a handle to resize or round corners Initially, the two rounding handles are in the top right corner; two resize handles are in top left and bottom right corners. lock width, height, or ratio (resize handles) lock the corner circular (rounding handles) Resize handles change the width and height of the rectangle in its own coordinate system, before any transforms are applied. When rounding corners, dragging only one rounding handle (with the other at the corner) keeps the corner circular. You can drag both handles for an elliptic rounded corner, or drag one with Ctrl to make sure the other one is synchronized. deselect
*
Drawing draw an ellipse make circle or integer-ratio ellipse This restricts ellipse so its height/width ratio is a whole number. draw around the starting point This creates an ellipse symmetric around the starting point of the mouse drag. Editing click an object to select select under toggle selection drag a handle to resize, make arc or segment Initially, the two arc/segment handles are in the rightmost point; two resize handles are at the topmost and leftmost points. lock circle (resize handles) snap to angle steps (arc/segment handles) Resize handles change the width and height of the ellipse in its own coordinate system, before any transforms are applied. The default angle step is 15 degrees. deselect
*
Drawing draw a star snap star to angle steps The default angle step is 15 degrees. Editing click an object to select select under toggle selection drag a handle to vary the star shape keep star rays radial (no skew) round the star remove rounding randomize the star remove randomization deselect
*
Drawing draw a spiral snap spiral to angle steps The default angle step is 15 degrees. Editing click an object to select select under toggle selection roll/unroll from inside (inner handle) Dragging the inner handle adjusts the "inner radius" parameter. converge/diverge (inner handle) reset divergence (inner handle) Vertical Alt+drag of the inner handle adjusts the "divergence" parameter, Alt+click resets it to 1. zero inner radius (inner handle) Shift+click on inner handle makes the spiral start from the center. roll/unroll from outside (outer handle) Dragging the outer handle adjusts the "turns" parameter. Use Shift+Alt+drag to roll/unroll without changing radius. scale/rotate (outer handle) Use Shift+Alt to rotate only (locks the radius of the spiral). snap handles to angle steps The default angle step is 15 degrees. This works for both handles. deselect
*
zoom in zoom out zoom into the area
*
draw a freehand line add to selected path If a path is selected, Shift+dragging anywhere creates a new subpath instead of a new independent path. temporarily disable snapping Shift also temporaily disables snapping to grid or guides when you are drawing with grid or guides on.
*
Create nodes create a sharp node If no path is being created, this starts a new path. add to selected path If a path is selected, Shift+clicking anywhere starts a new subpath instead of a new independent path. create a bezier node with two handles move only one handle This moves only one handle (instead of both) to create a cusp node. snap the handle to angle steps The default angle step is 15 degrees. Create segments snap the segment to angle steps This snaps the new node's angle, relative to the previous node, to angle steps (default 15 degrees). Finish finish current line finish current line finish current line Enter, right click, or double left click finish the current line, discarding the last unfinished (red) segment. Keyboard cancel current line erase last segment of current line
*
draw a calligraphic line adjust pen width adjust pen angle Width and angle can be adjusted while drawing. deselect
*
Creating gradients create gradient This creates gradient on selected objects. The Controls bar lets you select linear/radial and fill/stroke for the new gradient. create default gradient This creates default (horizontal edge-to-edge for linear, centered edge-to-edge-to-edge for radial) gradient on clicked object. Handles select next handle select previous handle move selected handle by the nudge distance move selected handle by 10x nudge distance The default nudge distance is 2 px (SVG pixel units, not screen pixels). move selected handle by 1 pixel move selected handle by 10 pixels The actual distance for pixel movements depends on zoom level. Zoom in for finer movement. deselect handle open gradient editor Double clicking a gradient handle opens the Gradient Editor with that gradient and the clicked handle chosen in the stops list. Reversing r reverse gradient definition This mirrors the stop positions of the current gradient without moving the gradient handles. Mouse select click an object to select select under toggle selection
*
pick fill color pick stroke color average fill color average stroke color Click applies the color under cursor to the current selection. Dragging a radius calculates the average color of a circular area. If a gradient handle (in Gradient tool) is selected, it gets the color instead of the entire object. pick inverse color If Alt is pressed, picking color (with or without Shift, by click or by drag) picks the inverse of the color. C copy color This copies the color under cursor to the system clipboard, as text in RRGGBBAA format (8 hex digits).
*
Selecting/creating create/select a text object Clicking in an empty space or on a non-text creates a text object; now you can type your text. Clicking on a text object selects it; cursor is placed near the click point. deselect the text object Text navigation move cursor by one character move cursor by one word move cursor by one paragraph go to beginning/end of line go to beginning/end of text All these commands cancel current text selection, if any. Flowed text (internal frame) create flowed text Clicking and dragging in an empty space or on a non-text creates a flowed text object with internal frame. adjust frame size Dragging the handle in the lower right corner of the selected flowed text changes width/height of the frame. lock width, height, or ratio of frame Dragging the corner handle with Ctrl resizes the frame preserving either width, or height, or ratio. Flowed text (external frame) W flow text into frame With a text object and a shape/path selected, this flows text into the shape/path. Both remain separate objects, but are linked; editing the shape/path causes the text to reflow. W unflow text from frame This cuts the flowed text's link to the shape/path, producing a single-line regular text object. D select external frame To find out which object is the frame of this flowed text, select it and press Shift+D. The frame will be selected. Text on path D select path from text To find out which path this text is put on, select it and press Shift+D. The path will be selected. Editing text To type + and - characters, use the main keyboard; keypad + and - are reserved for zoom (unless NumLock is on). start a new line or paragraph Enter in regular text creates new line; in flowed text it creates a new paragraph U toggle Unicode entry To insert an arbitrary Unicode character, type Ctrl+U, then the hexadecimal code point, then Enter. For example, Ctrl+U 2 0 1 4 Enter inserts an em-dash. To stay in Unicode mode after inserting the character, press Space instead of Enter. Press Esc or another Ctrl+U to cancel Unicode mode without inserting the character. insert no-break space A no-break space is visible even in a text object without xml:space="preserve". Selecting text select text Left-dragging over a text object selects a text span. select text by character select text by word select to beginning/end of line select to beginning/end of text select word select line A select all text This selects the entire text of the current text object. Styling selection B make selection bold I make selection italic Also, you can use the Text&Font or Fill&Stroke dialogs to assign any style to text selection. Letter spacing > expand line/paragraph by 1 pixel > expand line/paragraph by 10 pixels < contract line/paragraph by 1 pixel < contract line/paragraph by 10 pixels These commands (only when editing text) adjust letter spacing in the current line (regular text) or paragraph (flowed text). The actual adjustment for pixel movements depends on zoom level. Zoom in for finer adjustment. Line spacing > make the text object taller by 1 pixel > make the text object taller by 10 pixels < make the text object shorter by 1 pixel < make the text object shorter by 10 pixels These commands (only when editing text) adjust line spacing in the entire text object (regular or flowed). The actual adjustment for pixel movements depends on zoom level. Zoom in for finer adjustment. Kerning and shifting shift characters by 1 pixel shift characters by 10 pixels These commands work when editing a regular text object. Kerning does not work in flowed text. With no selection, they shift (horizontally or vertically) the characters after the cursor until the end of line. With selection, they shift the selection relative to the rest of text (by inserting opposite kerns at both ends of selection). The actual adjustment for pixel movements depends on zoom level. Zoom in for finer adjustment. Rotating [ ] rotate character(s) by 90 degrees [ ] rotate character(s) by 1 pixel These commands rotate the next character (without selection) or all characters in the selection (with selection). Rotation only works in regular text (not flowed text). The actual angle for pixel rotation depends on zoom level. Zoom in for finer movement.