Area ru.cnc-club.filter.gcodetools_area_area_fill_area_artefacts_ptg gcodetools.py inkex.py 100 -10 0 <_param name="help" type="description"> "Create area offset": creates several Inkscape path offsets to fill original path's area up to "Area radius" value. Outlines start from "1/2 D" up to "Area width" total width with "D" steps where D is taken from the nearest tool definition ("Tool diameter" value). Only one offset will be created if the "Area width" is equal to "1/2 D". 0 0 0 <_option value="zig-zag">Zig zag <_option value="spiral">Spiral 5.0 <_option value="mark with an arrow">mark with an arrow <_option value="mark with style">mark with style <_option value="delete">delete <_param name="help" type="description"> Usage: 1. Select all Area Offsets (gray outlines) 2. Object/Ungroup (Shift+Ctrl+G) 3. Press Apply Suspected small objects will be marked out by colored arrows. 1 4 <_option value="subpath by subpath">Subpath by subpath <_option value="path by path">Path by path <_option value="pass by pass">Pass by Pass d True <_param name="help" type="description"> Biarc interpolation tolerance is the maximum distance between path and its approximation. The segment will be split into two segments if the distance between path's segment and its approximation exceeds biarc interpolation tolerance. For depth function c=color intensity from 0.0 (white) to 1.0 (black), d is the depth defined by orientation points, s - surface defined by orientation points. 1 0.0 true 0.05 False output.ngc true /home 5 <_item value="G21 (All units in mm)">mm <_item value="G20 (All units in inches)">in <_item value=" ">None <_item value="parameterize();">Parameterize Gcode <_item value="flip(y);parameterize();">Flip y axis and parameterize Gcode <_item value="round(4);">Round all values to 4 digits <_item value='regex("G01 Z([0-9\.\-]+).*\(Penetrate\)", lambda match: "G00 Z%f (Fast pre-penetrate)\n%s" %(float(match.group(1))+5, match.group(0)));'>Fast pre-penetrate false <_param name="fullhelp" type="description"> Gcodetools plug-in: converts paths to Gcode (using circular interpolation), makes offset paths and engraves sharp corners using cone cutters. This plug-in calculates Gcode for paths using circular interpolation or linear motion when needed. Tutorials, manuals and support can be found at English support forum: http://www.cnc-club.ru/gcodetools and Russian support forum: http://www.cnc-club.ru/gcodetoolsru Credits: Nick Drobchenko, Vladimir Kalyaev, John Brooker, Henry Nicolas, Chris Lusby Taylor. Gcodetools ver. 1.7 path