<_name>Plot org.ekips.filter.plot plotter.py hpgl_decoder.py hpgl_encoder.py inkex.py <_param name="introduction" type="description">Please make sure that all objects you want to plot are converted to paths. COM1 9600 110 300 600 1200 2400 4800 9600 14400 19200 28800 38400 56000 57600 115200 8 Bits 7 Bits 6 Bits 5 Bits 1 Bit 1.5 Bits 2 Bits None Even Odd Mark Space <_item value="xonxoff">Software (XON/XOFF) <_item value="rtscts">Hardware (RTS/CTS) <_item value="dsrdtrrtscts">Hardware (DSR/DTR + RTS/CTS) <_item value="none">None <_item value="HPGL">HPGL <_item value="DMPL">DMPL <_item value="KNK">KNK Plotter (HPGL variant)   <_param name="freezeHelp" type="description">Using wrong settings can under certain circumstances cause Inkscape to freeze. Always save your work before plotting! <_param name="serialHelp" type="description">This can be a physical serial connection or a USB-to-Serial bridge. Ask your plotter manufacturer for drivers if needed. <_param name="parallelHelp" type="description">Parallel (LPT) connections are not supported. 1016.0 1016.0 1 0 0 0 90 180 270 false false false   <_param name="multiplePensHelp" type="description">If you want to use multiple pens on your pen plotter create one layer for each pen, name the layers "Pen 1", "Pen 2", etc., and put your drawings in the corresponding layers. This overrules the pen number option above. 1.00 0.25 true 1.2 true   false <_param name="settingsHelp" type="description">All these settings depend on the plotter you use, for more information please consult the manual or homepage for your plotter. path