cleanup

(bzr r13093)

1 files changed, 4 insertions, 4 deletions

diff --git a/share/extensions/plotter.inx b/share/extensions/plotter.inx
index c4b3e2b25..fc620f8a3 100644
--- a/share/extensions/plotter.inx
+++ b/share/extensions/plotter.inx
@@ -8,7 +8,7 @@
     <dependency type="executable" location="extensions">inkex.py</dependency>
     <_param name="introduction" type="description">Please make sure that all objects you want to plot are converted to paths.</_param>
     <param name="tab" type="notebook">
-        <page name="misc" _gui-text="Connection ">
+        <page name="misc" _gui-text="Connection Settings ">
             <param name="serialPort" type="string" _gui-text="Serial port" _gui-description="The port of your serial connection, on Windows something like 'COM1', on Linux something like: '/dev/ttyUSB0'. (Default: COM1)">COM1</param>
             <param name="serialBaudRate" type="optiongroup" appearance="minimal" _gui-text="Serial baud rate" _gui-description="The Baud rate of your serial connection. (Default: 9600)">
                 <option value="9600">9600</option>
@@ -43,7 +43,7 @@
             <_param name="serialHelp" type="description">This can be a physical serial connection or a USB-to-Serial bridge. Ask your plotter manufacturer for drivers if needed.</_param>
             <_param name="parallelHelp" type="description">Parallel (LPT) connections are not supported.</_param>
         </page>
-        <page name="plotter" _gui-text="Plotter ">
+        <page name="plotter" _gui-text="Plotter Settings ">
             <param name="resolutionX" type="float" min="1.0" max="4096.0" precision="1" _gui-text="Resolution X (dpi)" _gui-description="The amount of steps the plotter moves if it moves for 1 inch on the X axis. (Default: 1016.0)">1016.0</param>
             <param name="resolutionY" type="float" min="1.0" max="4096.0" precision="1" _gui-text="Resolution Y (dpi)" _gui-description="The amount of steps the plotter moves if it moves for 1 inch on the Y axis. (Default: 1016.0)">1016.0</param>
             <param name="pen" type="int" min="0" max="99" _gui-text="Pen number" _gui-description="The number of the pen (tool) to use. (Standard: '1')">1</param>
@@ -59,7 +59,7 @@
             <param name="mirrorY" type="boolean" _gui-text="Mirror Y axis" _gui-description="Check this to mirror the Y axis. (Default: Unchecked)">false</param>
             <param name="center" type="boolean" _gui-text="Center zero point" _gui-description="Check this if your plotter uses a centered zero point. (Default: Unchecked)">false</param>
         </page>
-        <page name="misc" _gui-text="Features ">
+        <page name="misc" _gui-text="Plot Features ">
             <param name="overcut" type="float" min="0.0" max="100.0" precision="2" _gui-text="Overcut (mm)" _gui-description="The distance in mm that will be cut over the starting point of the path to prevent open paths, set to 0.0 to omit command. (Default: 1.00)">1.00</param>
             <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool offset (mm)" _gui-description="The offset from the tool tip to the tool axis in mm, set to 0.0 to omit command. (Default: 0.25)">0.25</param>
             <param name="precut" type="boolean" _gui-text="Use precut" _gui-description="Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)">true</param>
@@ -70,7 +70,7 @@
         </page>
     </param>
     <_param name="settingsHelp" type="description">All these settings depend on the plotter you use, for more information please consult the manual or homepage for your plotter.</_param>
-    <effect needs-live-preview="false">
+    <effect needs-live-preview="false" needs-document="true">
         <object-type>path</object-type>
         <effects-menu>
             <submenu _name="Export"/>