removed unnecessary features

(bzr r13091)

1 files changed, 5 insertions, 12 deletions

diff --git a/share/extensions/plotter.inx b/share/extensions/plotter.inx
index c8f009140..c4b3e2b25 100644
--- a/share/extensions/plotter.inx
+++ b/share/extensions/plotter.inx
@@ -8,7 +8,7 @@
     <dependency type="executable" location="extensions">inkex.py</dependency>
     <_param name="introduction" type="description">Please make sure that all objects you want to plot are converted to paths.</_param>
     <param name="tab" type="notebook">
-        <page name="misc" _gui-text="Connection">
+        <page name="misc" _gui-text="Connection ">
             <param name="serialPort" type="string" _gui-text="Serial port" _gui-description="The port of your serial connection, on Windows something like 'COM1', on Linux something like: '/dev/ttyUSB0'. (Default: COM1)">COM1</param>
             <param name="serialBaudRate" type="optiongroup" appearance="minimal" _gui-text="Serial baud rate" _gui-description="The Baud rate of your serial connection. (Default: 9600)">
                 <option value="9600">9600</option>
@@ -43,7 +43,7 @@
             <_param name="serialHelp" type="description">This can be a physical serial connection or a USB-to-Serial bridge. Ask your plotter manufacturer for drivers if needed.</_param>
             <_param name="parallelHelp" type="description">Parallel (LPT) connections are not supported.</_param>
         </page>
-        <page name="plotter" _gui-text="Plotter Settings">
+        <page name="plotter" _gui-text="Plotter ">
             <param name="resolutionX" type="float" min="1.0" max="4096.0" precision="1" _gui-text="Resolution X (dpi)" _gui-description="The amount of steps the plotter moves if it moves for 1 inch on the X axis. (Default: 1016.0)">1016.0</param>
             <param name="resolutionY" type="float" min="1.0" max="4096.0" precision="1" _gui-text="Resolution Y (dpi)" _gui-description="The amount of steps the plotter moves if it moves for 1 inch on the Y axis. (Default: 1016.0)">1016.0</param>
             <param name="pen" type="int" min="0" max="99" _gui-text="Pen number" _gui-description="The number of the pen (tool) to use. (Standard: '1')">1</param>
@@ -59,18 +59,11 @@
             <param name="mirrorY" type="boolean" _gui-text="Mirror Y axis" _gui-description="Check this to mirror the Y axis. (Default: Unchecked)">false</param>
             <param name="center" type="boolean" _gui-text="Center zero point" _gui-description="Check this if your plotter uses a centered zero point. (Default: Unchecked)">false</param>
         </page>
-        <page name="overcutToolOffset" _gui-text="Overcut &#x26; Tool Offset">
-            <param name="useOvercut" type="boolean" _gui-text="Use overcut" _gui-description="Check this to use overcut, if not checked the 'Overcut' parameter is unused. (Default: Checked)">true</param>
-            <param name="overcut" type="float" min="0.0" max="100.0" precision="2" _gui-text="Overcut (mm)" _gui-description="The distance in mm that will be cut over the starting point of the path to prevent open paths. (Default: 1.00)">1.00</param>
-            <param name="space" type="description">&#xa0;</param>
-            <param name="useToolOffset" type="boolean" _gui-text="Use tool offset correction" _gui-description="Check this to use the tool offset correction, if not checked the 'Tool offset' and 'Precut' parameters are unused. (Default: Checked)">true</param>
-            <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool offset (mm)" _gui-description="The offset from the tool tip to the tool axis in mm. (Default: 0.25)">0.25</param>
+        <page name="misc" _gui-text="Features ">
+            <param name="overcut" type="float" min="0.0" max="100.0" precision="2" _gui-text="Overcut (mm)" _gui-description="The distance in mm that will be cut over the starting point of the path to prevent open paths, set to 0.0 to omit command. (Default: 1.00)">1.00</param>
+            <param name="toolOffset" type="float" min="0.0" max="20.0" precision="2" _gui-text="Tool offset (mm)" _gui-description="The offset from the tool tip to the tool axis in mm, set to 0.0 to omit command. (Default: 0.25)">0.25</param>
             <param name="precut" type="boolean" _gui-text="Use precut" _gui-description="Check this to cut a small line before the real drawing starts to correctly align the tool orientation. (Default: Checked)">true</param>
-        </page>
-        <page name="misc" _gui-text="Miscellaneous">
             <param name="flat" type="float" min="0.1" max="10.0" precision="1" _gui-text="Curve flatness" _gui-description="Curves are divided into lines, this number controls how fine the curves will be reproduced, the smaller the finer. (Default: '1.2')">1.2</param>
-            <param name="offsetX" type="float" min="-10000.0" max="10000.0" precision="2" _gui-text="X offset (mm)" _gui-description="Shifts your drawing on the X axis in mm. (Default: '0.00')">0.00</param>
-            <param name="offsetY" type="float" min="-10000.0" max="10000.0" precision="2" _gui-text="Y offset (mm)" _gui-description="Shifts your drawing on the Y axis in mm. (Default: '0.00')">0.00</param>
             <param name="autoAlign" type="boolean" _gui-text="Auto align" _gui-description="Check this to auto align the drawing to the zero point (Plus the tool offset if used). If unchecked you have to make sure that all parts of your drawing are within the document border! (Default: Checked)">true</param>
             <param name="space" type="description">&#xa0;</param>
             <param name="debug" type="boolean" _gui-text="Show debug information" _gui-description="Check this to get verbose information about the plot without actually sending something to the plotter (A.k.a. data dump). (Default: Unchecked)">false</param>