update JS

(bzr r2555)

8 files changed, 6 insertions, 1783 deletions

diff --git a/src/dom/js/fdlibm/.cvsignore b/src/dom/js/fdlibm/.cvsignore
deleted file mode 100644
index bb5cc66ee..000000000
--- a/src/dom/js/fdlibm/.cvsignore
+++ /dev/null
@@ -1,7 +0,0 @@
-*.pdb
-*.ncb
-*.opt
-*.plg
-Debug
-Release
-Makefile
diff --git a/src/dom/js/fdlibm/Makefile.in b/src/dom/js/fdlibm/Makefile.in
deleted file mode 100644
index fdec7b7e8..000000000
--- a/src/dom/js/fdlibm/Makefile.in
+++ /dev/null
@@ -1,127 +0,0 @@
-#
-# ***** BEGIN LICENSE BLOCK *****
-# Version: MPL 1.1/GPL 2.0/LGPL 2.1
-#
-# The contents of this file are subject to the Mozilla Public License Version
-# 1.1 (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-# http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS" basis,
-# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-# for the specific language governing rights and limitations under the
-# License.
-#
-# The Original Code is Mozilla Communicator client code, released
-# March 31, 1998.
-#
-# The Initial Developer of the Original Code is
-# Netscape Communications Corporation.
-# Portions created by the Initial Developer are Copyright (C) 1998
-# the Initial Developer. All Rights Reserved.
-#
-# Contributor(s):
-#
-# Alternatively, the contents of this file may be used under the terms of
-# either of the GNU General Public License Version 2 or later (the "GPL"),
-# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-# in which case the provisions of the GPL or the LGPL are applicable instead
-# of those above. If you wish to allow use of your version of this file only
-# under the terms of either the GPL or the LGPL, and not to allow others to
-# use your version of this file under the terms of the MPL, indicate your
-# decision by deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL or the LGPL. If you do not delete
-# the provisions above, a recipient may use your version of this file under
-# the terms of any one of the MPL, the GPL or the LGPL.
-#
-# ***** END LICENSE BLOCK *****
-
-DEPTH		= ../../..
-topsrcdir	= @top_srcdir@
-srcdir		= @srcdir@
-VPATH		= @srcdir@
-
-include $(DEPTH)/config/autoconf.mk
-
-MODULE		= js
-LIBRARY_NAME	= fdm
-
-CSRCS		= \
-		e_acos.c \
-		e_asin.c \
-		e_atan2.c \
-		e_exp.c \
-		e_fmod.c \
-		e_log.c \
-		e_pow.c \
-		e_rem_pio2.c \
-		s_scalbn.c \
-		e_sqrt.c \
-		k_cos.c \
-		k_sin.c \
-		k_rem_pio2.c \
-		k_tan.c \
-		s_atan.c \
-		s_ceil.c \
-		s_copysign.c \
-		s_cos.c \
-		s_fabs.c \
-		s_finite.c \
-		s_floor.c \
-		s_isnan.c \
-		s_lib_version.c \
-		s_sin.c \
-		s_tan.c \
-		w_acos.c \
-		w_asin.c \
-		w_atan2.c \
-		w_exp.c \
-		w_fmod.c \
-		w_log.c \
-		w_pow.c \
-		w_sqrt.c \
-		$(NULL)
-
-EXPORTS		= fdlibm.h
-
-# we need to force a static lib for the linking that js/src/Makefile.in wants
-# to do, and we don't really need a shared library ever, so:
-FORCE_STATIC_LIB = 1
-FORCE_USE_PIC = 1
-
-include $(topsrcdir)/config/rules.mk
-
-#
-# Default IEEE libm
-#
-CFLAGS		+= -D_IEEE_LIBM
-
-ifeq ($(OS_ARCH),Linux)
-LDFLAGS		+= -ldl
-endif
-
-ifeq ($(OS_ARCH),OSF1)
-LDFLAGS		+= -lc_r
-endif
-
-ifeq ($(OS_ARCH),SunOS)
-LDFLAGS		+= -lposix4 -ldl -lnsl -lsocket
-ifeq ($(CPU_ARCH),sparc)
-
-ifndef JS_NO_ULTRA
-ULTRA_OPTIONS	:= -xarch=v8plus,-DULTRA_SPARC
-ULTRA_OPTIONSCC	:= -DULTRA_SPARC
-else
-ULTRA_OPTIONS	:= -xarch=v8
-ULTRA_OPTIONSCC	:=
-endif
-
-ifeq ($(shell uname -m),sun4u)
-ASFLAGS		+= -Wa,$(ULTRA_OPTIONS),-P,-L,-D_ASM,-D__STDC__=0 $(ULTRA_OPTIONSCC)
-else
-ASFLAGS		+= -Wa,-xarch=v8,-P,-L,-D_ASM,-D__STDC__=0
-endif
-
-endif
-endif
-
diff --git a/src/dom/js/fdlibm/Makefile.ref b/src/dom/js/fdlibm/Makefile.ref
deleted file mode 100644
index de378025c..000000000
--- a/src/dom/js/fdlibm/Makefile.ref
+++ /dev/null
@@ -1,192 +0,0 @@
-# -*- Mode: makefile -*-
-#
-# ***** BEGIN LICENSE BLOCK *****
-# Version: MPL 1.1/GPL 2.0/LGPL 2.1
-#
-# The contents of this file are subject to the Mozilla Public License Version
-# 1.1 (the "License"); you may not use this file except in compliance with
-# the License. You may obtain a copy of the License at
-# http://www.mozilla.org/MPL/
-#
-# Software distributed under the License is distributed on an "AS IS" basis,
-# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
-# for the specific language governing rights and limitations under the
-# License.
-#
-# The Original Code is Mozilla Communicator client code, released
-# March 31, 1998.
-#
-# The Initial Developer of the Original Code is
-# Sun Microsystems, Inc.
-# Portions created by the Initial Developer are Copyright (C) 1998
-# the Initial Developer. All Rights Reserved.
-#
-# Contributor(s):
-#
-# Alternatively, the contents of this file may be used under the terms of
-# either of the GNU General Public License Version 2 or later (the "GPL"),
-# or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
-# in which case the provisions of the GPL or the LGPL are applicable instead
-# of those above. If you wish to allow use of your version of this file only
-# under the terms of either the GPL or the LGPL, and not to allow others to
-# use your version of this file under the terms of the MPL, indicate your
-# decision by deleting the provisions above and replace them with the notice
-# and other provisions required by the GPL or the LGPL. If you do not delete
-# the provisions above, a recipient may use your version of this file under
-# the terms of any one of the MPL, the GPL or the LGPL.
-#
-# ***** END LICENSE BLOCK *****
-
-#
-#  @(#)Makefile 1.4 95/01/18 
-# 
-#  ====================================================
-#  Copyright (C) 1993 by Sun Microsystems, Inc. All rights reserved.
-# 
-#  Developed at SunSoft, a Sun Microsystems, Inc. business.
-#  Permission to use, copy, modify, and distribute this
-#  software is freely granted, provided that this notice 
-#  is preserved.
-#  ====================================================
-# 
-# 
-
-#
-# There are two options in making libm at fdlibm compile time:
-#       _IEEE_LIBM      --- IEEE libm; smaller, and somewhat faster
-#       _MULTI_LIBM     --- Support multi-standard at runtime by 
-#                           imposing wrapper functions defined in 
-#                           fdlibm.h:
-#                               _IEEE_MODE      -- IEEE
-#                               _XOPEN_MODE     -- X/OPEN
-#                               _POSIX_MODE     -- POSIX/ANSI
-#                               _SVID3_MODE     -- SVID
-#
-# Here is how to set up CFLAGS to create the desired libm at 
-# compile time:
-#
-#       CFLAGS = -D_IEEE_LIBM           ... IEEE libm (recommended)
-#       CFLAGS = -D_SVID3_MODE  ... Multi-standard supported
-#                                           libm with SVID as the 
-#                                           default standard
-#       CFLAGS = -D_XOPEN_MODE  ... Multi-standard supported
-#                                           libm with XOPEN as the 
-#                                           default standard
-#       CFLAGS = -D_POSIX_MODE  ... Multi-standard supported
-#                                           libm with POSIX as the 
-#                                           default standard
-#       CFLAGS =                        ... Multi-standard supported
-#                                           libm with IEEE as the 
-#                                           default standard
-# 
-# NOTE: if scalb's second arguement is an int, then one must
-# define _SCALB_INT in CFLAGS. The default prototype of scalb
-# is double scalb(double, double)
-#
-
-DEPTH           = ..
-
-include $(DEPTH)/config.mk
-
-#
-# Default IEEE libm
-#
-CFLAGS          += -DXP_UNIX $(OPTIMIZER) $(OS_CFLAGS) $(DEFINES) $(INCLUDES) \
-		  -DJSFILE $(XCFLAGS) -D_IEEE_LIBM
-
-# Need for jstypes.h and friends
-INCLUDES += -I..
-INCLUDES += -I../$(OBJDIR)
-
-#CC = cc
-
-INCFILES = fdlibm.h
-.INIT: $(INCFILES)
-.KEEP_STATE:
-FDLIBM_CFILES =         \
-	k_standard.c k_rem_pio2.c \
-	k_cos.c k_sin.c k_tan.c \
-	e_acos.c e_acosh.c e_asin.c e_atan2.c \
-	e_atanh.c e_cosh.c e_exp.c e_fmod.c \
-	e_gamma.c e_gamma_r.c e_hypot.c e_j0.c \
-	e_j1.c e_jn.c e_lgamma.c e_lgamma_r.c \
-	e_log.c e_log10.c e_pow.c e_rem_pio2.c e_remainder.c \
-	e_scalb.c e_sinh.c e_sqrt.c \
-	w_acos.c w_acosh.c w_asin.c w_atan2.c \
-	w_atanh.c w_cosh.c w_exp.c w_fmod.c \
-	w_gamma.c w_gamma_r.c w_hypot.c w_j0.c \
-	w_j1.c w_jn.c w_lgamma.c w_lgamma_r.c \
-	w_log.c w_log10.c w_pow.c w_remainder.c \
-	w_scalb.c w_sinh.c w_sqrt.c \
-	s_asinh.c s_atan.c s_cbrt.c s_ceil.c s_copysign.c \
-	s_cos.c s_erf.c s_expm1.c s_fabs.c s_finite.c s_floor.c \
-	s_frexp.c s_ilogb.c s_isnan.c s_ldexp.c s_lib_version.c \
-	s_log1p.c s_logb.c s_matherr.c s_modf.c s_nextafter.c \
-	s_rint.c s_scalbn.c s_signgam.c s_significand.c s_sin.c \
-	s_tan.c s_tanh.c
-
-ifdef USE_MSVC
-FDLIBM_OBJS = $(addprefix $(OBJDIR)/, $(FDLIBM_CFILES:.c=.obj))
-else
-FDLIBM_OBJS = $(addprefix $(OBJDIR)/, $(FDLIBM_CFILES:.c=.o))
-endif
-
-ifdef USE_MSVC
-LIBRARY = $(OBJDIR)/fdlibm.lib
-else
-LIBRARY = $(OBJDIR)/libfdm.a
-endif
-
-define MAKE_OBJDIR
-if test ! -d $(@D); then rm -rf $(@D); mkdir -p $(@D); fi
-endef
-
-all: $(LIBRARY) 
-
-export:
-
-$(OBJDIR)/%: %.c
-	@$(MAKE_OBJDIR)
-	$(CC) -o $@ $(CFLAGS) $*.c $(LDFLAGS)
-
-$(OBJDIR)/%.o: %.c
-	@$(MAKE_OBJDIR)
-	$(CC) -o $@ -c $(CFLAGS) $*.c
-
-$(OBJDIR)/%.o: %.s
-	@$(MAKE_OBJDIR)
-	$(AS) -o $@ $(ASFLAGS) $*.s
-
-# windows only
-$(OBJDIR)/%.obj: %.c
-	@$(MAKE_OBJDIR)
-	$(CC) -Fo$(OBJDIR)/ -c $(CFLAGS) $*.c
-
-ifeq ($(OS_ARCH),OS2)
-$(LIBRARY): $(FDLIBM_OBJS)
-	$(AR) $@ $? $(AR_OS2_SUFFIX)
-	$(RANLIB) $@
-else
-ifdef USE_MSVC
-$(LIBRARY): $(FDLIBM_OBJS)
-	lib.exe /out:"$@" $?
-else
-$(LIBRARY): $(FDLIBM_OBJS)
-	$(AR) rv $@ $?
-	$(RANLIB) $@
-endif
-endif
-
-libfdm.a : $(FDLIBM_OBJS) 
-	$(AR) cru $(OBJDIR)/libfdm.a $(FDLIBM_OBJS)
-	$(RANLIB) $(OBJDIR)/libfdm.a
-
-clean:
-	rm -rf $(FDLIBM_OBJS)
-
-clobber:
-	rm -rf $(FDLIBM_OBJS) $(LIBRARY) $(DEPENDENCIES)
-
-SUFFIXES: .i
-%.i: %.c
-	$(CC) -C -E $(CFLAGS) $< > $*.i
diff --git a/src/dom/js/fdlibm/e_rem_pio2.c b/src/dom/js/fdlibm/e_rem_pio2.c
index 6f9423551..c9d261875 100644
--- a/src/dom/js/fdlibm/e_rem_pio2.c
+++ b/src/dom/js/fdlibm/e_rem_pio2.c
@@ -126,7 +126,8 @@ pio2_3t =  8.47842766036889956997e-32; /* 0x397B839A, 0x252049C1 */
 #endif
 {
         fd_twoints u, ux, uz;
-	double z,w,t,r,fn;
+        double z = 0;
+	double w,t,r,fn;
 	double tx[3];
 	int e0,i,j,nx,n,ix,hx;
 
diff --git a/src/dom/js/fdlibm/fdlibm.h b/src/dom/js/fdlibm/fdlibm.h
index 8e25214f0..e623be56e 100644
--- a/src/dom/js/fdlibm/fdlibm.h
+++ b/src/dom/js/fdlibm/fdlibm.h
@@ -61,13 +61,13 @@
 #define __LITTLE_ENDIAN
 #endif
 
-#if defined(linux) && (defined(__i386__) || defined(__x86_64__))
+#if defined(linux) && (defined(__i386__) || defined(__x86_64__) || defined(__ia64) || (defined(__mips) && defined(__MIPSEL__)))
 #define __LITTLE_ENDIAN
 #endif
 
 /* End here. The rest is the standard file. */
 
-#ifdef __NEWVALID	/* special setup for Sun test regime */
+#ifdef SOLARIS	/* special setup for Sun test regime */
 #if defined(i386) || defined(i486) || \
 	defined(intel) || defined(x86) || defined(i86pc)
 #define __LITTLE_ENDIAN
diff --git a/src/dom/js/fdlibm/fdlibm.mak b/src/dom/js/fdlibm/fdlibm.mak
deleted file mode 100644
index 436c1c450..000000000
--- a/src/dom/js/fdlibm/fdlibm.mak
+++ /dev/null
@@ -1,1453 +0,0 @@
-# Microsoft Developer Studio Generated NMAKE File, Format Version 4.20

-# ** DO NOT EDIT **

-

-# TARGTYPE "Win32 (x86) Static Library" 0x0104

-

-!IF "$(CFG)" == ""

-CFG=fdlibm - Win32 Debug

-!MESSAGE No configuration specified.  Defaulting to fdlibm - Win32 Debug.

-!ENDIF 

-

-!IF "$(CFG)" != "fdlibm - Win32 Release" && "$(CFG)" != "fdlibm - Win32 Debug"

-!MESSAGE Invalid configuration "$(CFG)" specified.

-!MESSAGE You can specify a configuration when running NMAKE on this makefile

-!MESSAGE by defining the macro CFG on the command line.  For example:

-!MESSAGE 

-!MESSAGE NMAKE /f "fdlibm.mak" CFG="fdlibm - Win32 Debug"

-!MESSAGE 

-!MESSAGE Possible choices for configuration are:

-!MESSAGE 

-!MESSAGE "fdlibm - Win32 Release" (based on "Win32 (x86) Static Library")

-!MESSAGE "fdlibm - Win32 Debug" (based on "Win32 (x86) Static Library")

-!MESSAGE 

-!ERROR An invalid configuration is specified.

-!ENDIF 

-

-!IF "$(OS)" == "Windows_NT"

-NULL=

-!ELSE 

-NULL=nul

-!ENDIF 

-################################################################################

-# Begin Project

-CPP=cl.exe

-

-!IF  "$(CFG)" == "fdlibm - Win32 Release"

-

-# PROP BASE Use_MFC 0

-# PROP BASE Use_Debug_Libraries 0

-# PROP BASE Output_Dir "fdlibm__"

-# PROP BASE Intermediate_Dir "fdlibm__"

-# PROP BASE Target_Dir ""

-# PROP Use_MFC 0

-# PROP Use_Debug_Libraries 0

-# PROP Output_Dir "fdlibm__"

-# PROP Intermediate_Dir "fdlibm__"

-# PROP Target_Dir ""

-OUTDIR=.\fdlibm__

-INTDIR=.\fdlibm__

-

-ALL : "$(OUTDIR)\fdlibm.lib"

-

-CLEAN : 

-	-@erase "$(INTDIR)\e_acos.obj"

-	-@erase "$(INTDIR)\e_acosh.obj"

-	-@erase "$(INTDIR)\e_asin.obj"

-	-@erase "$(INTDIR)\e_atan2.obj"

-	-@erase "$(INTDIR)\e_atanh.obj"

-	-@erase "$(INTDIR)\e_cosh.obj"

-	-@erase "$(INTDIR)\e_exp.obj"

-	-@erase "$(INTDIR)\e_fmod.obj"

-	-@erase "$(INTDIR)\e_gamma.obj"

-	-@erase "$(INTDIR)\e_gamma_r.obj"

-	-@erase "$(INTDIR)\e_hypot.obj"

-	-@erase "$(INTDIR)\e_j0.obj"

-	-@erase "$(INTDIR)\e_j1.obj"

-	-@erase "$(INTDIR)\e_jn.obj"

-	-@erase "$(INTDIR)\e_lgamma.obj"

-	-@erase "$(INTDIR)\e_lgamma_r.obj"

-	-@erase "$(INTDIR)\e_log.obj"

-	-@erase "$(INTDIR)\e_log10.obj"

-	-@erase "$(INTDIR)\e_pow.obj"

-	-@erase "$(INTDIR)\e_rem_pio2.obj"

-	-@erase "$(INTDIR)\e_remainder.obj"

-	-@erase "$(INTDIR)\e_scalb.obj"

-	-@erase "$(INTDIR)\e_sinh.obj"

-	-@erase "$(INTDIR)\e_sqrt.obj"

-	-@erase "$(INTDIR)\k_cos.obj"

-	-@erase "$(INTDIR)\k_rem_pio2.obj"

-	-@erase "$(INTDIR)\k_sin.obj"

-	-@erase "$(INTDIR)\k_standard.obj"

-	-@erase "$(INTDIR)\k_tan.obj"

-	-@erase "$(INTDIR)\s_asinh.obj"

-	-@erase "$(INTDIR)\s_atan.obj"

-	-@erase "$(INTDIR)\s_cbrt.obj"

-	-@erase "$(INTDIR)\s_ceil.obj"

-	-@erase "$(INTDIR)\s_copysign.obj"

-	-@erase "$(INTDIR)\s_cos.obj"

-	-@erase "$(INTDIR)\s_erf.obj"

-	-@erase "$(INTDIR)\s_expm1.obj"

-	-@erase "$(INTDIR)\s_fabs.obj"

-	-@erase "$(INTDIR)\s_finite.obj"

-	-@erase "$(INTDIR)\s_floor.obj"

-	-@erase "$(INTDIR)\s_frexp.obj"

-	-@erase "$(INTDIR)\s_ilogb.obj"

-	-@erase "$(INTDIR)\s_isnan.obj"

-	-@erase "$(INTDIR)\s_ldexp.obj"

-	-@erase "$(INTDIR)\s_lib_version.obj"

-	-@erase "$(INTDIR)\s_log1p.obj"

-	-@erase "$(INTDIR)\s_logb.obj"

-	-@erase "$(INTDIR)\s_matherr.obj"

-	-@erase "$(INTDIR)\s_modf.obj"

-	-@erase "$(INTDIR)\s_nextafter.obj"

-	-@erase "$(INTDIR)\s_rint.obj"

-	-@erase "$(INTDIR)\s_scalbn.obj"

-	-@erase "$(INTDIR)\s_signgam.obj"

-	-@erase "$(INTDIR)\s_significand.obj"

-	-@erase "$(INTDIR)\s_sin.obj"

-	-@erase "$(INTDIR)\s_tan.obj"

-	-@erase "$(INTDIR)\s_tanh.obj"

-	-@erase "$(INTDIR)\w_acos.obj"

-	-@erase "$(INTDIR)\w_acosh.obj"

-	-@erase "$(INTDIR)\w_asin.obj"

-	-@erase "$(INTDIR)\w_atan2.obj"

-	-@erase "$(INTDIR)\w_atanh.obj"

-	-@erase "$(INTDIR)\w_cosh.obj"

-	-@erase "$(INTDIR)\w_exp.obj"

-	-@erase "$(INTDIR)\w_fmod.obj"

-	-@erase "$(INTDIR)\w_gamma.obj"

-	-@erase "$(INTDIR)\w_gamma_r.obj"

-	-@erase "$(INTDIR)\w_hypot.obj"

-	-@erase "$(INTDIR)\w_j0.obj"

-	-@erase "$(INTDIR)\w_j1.obj"

-	-@erase "$(INTDIR)\w_jn.obj"

-	-@erase "$(INTDIR)\w_lgamma.obj"

-	-@erase "$(INTDIR)\w_lgamma_r.obj"

-	-@erase "$(INTDIR)\w_log.obj"

-	-@erase "$(INTDIR)\w_log10.obj"

-	-@erase "$(INTDIR)\w_pow.obj"

-	-@erase "$(INTDIR)\w_remainder.obj"

-	-@erase "$(INTDIR)\w_scalb.obj"

-	-@erase "$(INTDIR)\w_sinh.obj"

-	-@erase "$(INTDIR)\w_sqrt.obj"

-	-@erase "$(OUTDIR)\fdlibm.lib"

-

-"$(OUTDIR)" :

-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

-

-# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c

-# ADD CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c

-CPP_PROJ=/nologo /ML /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS"\

- /Fp"$(INTDIR)/fdlibm.pch" /YX /Fo"$(INTDIR)/" /c 

-CPP_OBJS=.\fdlibm__/

-CPP_SBRS=.\.

-BSC32=bscmake.exe

-# ADD BASE BSC32 /nologo

-# ADD BSC32 /nologo

-BSC32_FLAGS=/nologo /o"$(OUTDIR)/fdlibm.bsc" 

-BSC32_SBRS= \

-	

-LIB32=link.exe -lib

-# ADD BASE LIB32 /nologo

-# ADD LIB32 /nologo

-LIB32_FLAGS=/nologo /out:"$(OUTDIR)/fdlibm.lib" 

-LIB32_OBJS= \

-	"$(INTDIR)\e_acos.obj" \

-	"$(INTDIR)\e_acosh.obj" \

-	"$(INTDIR)\e_asin.obj" \

-	"$(INTDIR)\e_atan2.obj" \

-	"$(INTDIR)\e_atanh.obj" \

-	"$(INTDIR)\e_cosh.obj" \

-	"$(INTDIR)\e_exp.obj" \

-	"$(INTDIR)\e_fmod.obj" \

-	"$(INTDIR)\e_gamma.obj" \

-	"$(INTDIR)\e_gamma_r.obj" \

-	"$(INTDIR)\e_hypot.obj" \

-	"$(INTDIR)\e_j0.obj" \

-	"$(INTDIR)\e_j1.obj" \

-	"$(INTDIR)\e_jn.obj" \

-	"$(INTDIR)\e_lgamma.obj" \

-	"$(INTDIR)\e_lgamma_r.obj" \

-	"$(INTDIR)\e_log.obj" \

-	"$(INTDIR)\e_log10.obj" \

-	"$(INTDIR)\e_pow.obj" \

-	"$(INTDIR)\e_rem_pio2.obj" \

-	"$(INTDIR)\e_remainder.obj" \

-	"$(INTDIR)\e_scalb.obj" \

-	"$(INTDIR)\e_sinh.obj" \

-	"$(INTDIR)\e_sqrt.obj" \

-	"$(INTDIR)\k_cos.obj" \

-	"$(INTDIR)\k_rem_pio2.obj" \

-	"$(INTDIR)\k_sin.obj" \

-	"$(INTDIR)\k_standard.obj" \

-	"$(INTDIR)\k_tan.obj" \

-	"$(INTDIR)\s_asinh.obj" \

-	"$(INTDIR)\s_atan.obj" \

-	"$(INTDIR)\s_cbrt.obj" \

-	"$(INTDIR)\s_ceil.obj" \

-	"$(INTDIR)\s_copysign.obj" \

-	"$(INTDIR)\s_cos.obj" \

-	"$(INTDIR)\s_erf.obj" \

-	"$(INTDIR)\s_expm1.obj" \

-	"$(INTDIR)\s_fabs.obj" \

-	"$(INTDIR)\s_finite.obj" \

-	"$(INTDIR)\s_floor.obj" \

-	"$(INTDIR)\s_frexp.obj" \

-	"$(INTDIR)\s_ilogb.obj" \

-	"$(INTDIR)\s_isnan.obj" \

-	"$(INTDIR)\s_ldexp.obj" \

-	"$(INTDIR)\s_lib_version.obj" \

-	"$(INTDIR)\s_log1p.obj" \

-	"$(INTDIR)\s_logb.obj" \

-	"$(INTDIR)\s_matherr.obj" \

-	"$(INTDIR)\s_modf.obj" \

-	"$(INTDIR)\s_nextafter.obj" \

-	"$(INTDIR)\s_rint.obj" \

-	"$(INTDIR)\s_scalbn.obj" \

-	"$(INTDIR)\s_signgam.obj" \

-	"$(INTDIR)\s_significand.obj" \

-	"$(INTDIR)\s_sin.obj" \

-	"$(INTDIR)\s_tan.obj" \

-	"$(INTDIR)\s_tanh.obj" \

-	"$(INTDIR)\w_acos.obj" \

-	"$(INTDIR)\w_acosh.obj" \

-	"$(INTDIR)\w_asin.obj" \

-	"$(INTDIR)\w_atan2.obj" \

-	"$(INTDIR)\w_atanh.obj" \

-	"$(INTDIR)\w_cosh.obj" \

-	"$(INTDIR)\w_exp.obj" \

-	"$(INTDIR)\w_fmod.obj" \

-	"$(INTDIR)\w_gamma.obj" \

-	"$(INTDIR)\w_gamma_r.obj" \

-	"$(INTDIR)\w_hypot.obj" \

-	"$(INTDIR)\w_j0.obj" \

-	"$(INTDIR)\w_j1.obj" \

-	"$(INTDIR)\w_jn.obj" \

-	"$(INTDIR)\w_lgamma.obj" \

-	"$(INTDIR)\w_lgamma_r.obj" \

-	"$(INTDIR)\w_log.obj" \

-	"$(INTDIR)\w_log10.obj" \

-	"$(INTDIR)\w_pow.obj" \

-	"$(INTDIR)\w_remainder.obj" \

-	"$(INTDIR)\w_scalb.obj" \

-	"$(INTDIR)\w_sinh.obj" \

-	"$(INTDIR)\w_sqrt.obj"

-

-"$(OUTDIR)\fdlibm.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)

-    $(LIB32) @<<

-  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)

-<<

-

-!ELSEIF  "$(CFG)" == "fdlibm - Win32 Debug"

-

-# PROP BASE Use_MFC 0

-# PROP BASE Use_Debug_Libraries 1

-# PROP BASE Output_Dir "fdlibm_0"

-# PROP BASE Intermediate_Dir "fdlibm_0"

-# PROP BASE Target_Dir ""

-# PROP Use_MFC 0

-# PROP Use_Debug_Libraries 1

-# PROP Output_Dir "fdlibm_0"

-# PROP Intermediate_Dir "fdlibm_0"

-# PROP Target_Dir ""

-OUTDIR=.\fdlibm_0

-INTDIR=.\fdlibm_0

-

-ALL : "$(OUTDIR)\fdlibm.lib"

-

-CLEAN : 

-	-@erase "$(INTDIR)\e_acos.obj"

-	-@erase "$(INTDIR)\e_acosh.obj"

-	-@erase "$(INTDIR)\e_asin.obj"

-	-@erase "$(INTDIR)\e_atan2.obj"

-	-@erase "$(INTDIR)\e_atanh.obj"

-	-@erase "$(INTDIR)\e_cosh.obj"

-	-@erase "$(INTDIR)\e_exp.obj"

-	-@erase "$(INTDIR)\e_fmod.obj"

-	-@erase "$(INTDIR)\e_gamma.obj"

-	-@erase "$(INTDIR)\e_gamma_r.obj"

-	-@erase "$(INTDIR)\e_hypot.obj"

-	-@erase "$(INTDIR)\e_j0.obj"

-	-@erase "$(INTDIR)\e_j1.obj"

-	-@erase "$(INTDIR)\e_jn.obj"

-	-@erase "$(INTDIR)\e_lgamma.obj"

-	-@erase "$(INTDIR)\e_lgamma_r.obj"

-	-@erase "$(INTDIR)\e_log.obj"

-	-@erase "$(INTDIR)\e_log10.obj"

-	-@erase "$(INTDIR)\e_pow.obj"

-	-@erase "$(INTDIR)\e_rem_pio2.obj"

-	-@erase "$(INTDIR)\e_remainder.obj"

-	-@erase "$(INTDIR)\e_scalb.obj"

-	-@erase "$(INTDIR)\e_sinh.obj"

-	-@erase "$(INTDIR)\e_sqrt.obj"

-	-@erase "$(INTDIR)\k_cos.obj"

-	-@erase "$(INTDIR)\k_rem_pio2.obj"

-	-@erase "$(INTDIR)\k_sin.obj"

-	-@erase "$(INTDIR)\k_standard.obj"

-	-@erase "$(INTDIR)\k_tan.obj"

-	-@erase "$(INTDIR)\s_asinh.obj"

-	-@erase "$(INTDIR)\s_atan.obj"

-	-@erase "$(INTDIR)\s_cbrt.obj"

-	-@erase "$(INTDIR)\s_ceil.obj"

-	-@erase "$(INTDIR)\s_copysign.obj"

-	-@erase "$(INTDIR)\s_cos.obj"

-	-@erase "$(INTDIR)\s_erf.obj"

-	-@erase "$(INTDIR)\s_expm1.obj"

-	-@erase "$(INTDIR)\s_fabs.obj"

-	-@erase "$(INTDIR)\s_finite.obj"

-	-@erase "$(INTDIR)\s_floor.obj"

-	-@erase "$(INTDIR)\s_frexp.obj"

-	-@erase "$(INTDIR)\s_ilogb.obj"

-	-@erase "$(INTDIR)\s_isnan.obj"

-	-@erase "$(INTDIR)\s_ldexp.obj"

-	-@erase "$(INTDIR)\s_lib_version.obj"

-	-@erase "$(INTDIR)\s_log1p.obj"

-	-@erase "$(INTDIR)\s_logb.obj"

-	-@erase "$(INTDIR)\s_matherr.obj"

-	-@erase "$(INTDIR)\s_modf.obj"

-	-@erase "$(INTDIR)\s_nextafter.obj"

-	-@erase "$(INTDIR)\s_rint.obj"

-	-@erase "$(INTDIR)\s_scalbn.obj"

-	-@erase "$(INTDIR)\s_signgam.obj"

-	-@erase "$(INTDIR)\s_significand.obj"

-	-@erase "$(INTDIR)\s_sin.obj"

-	-@erase "$(INTDIR)\s_tan.obj"

-	-@erase "$(INTDIR)\s_tanh.obj"

-	-@erase "$(INTDIR)\w_acos.obj"

-	-@erase "$(INTDIR)\w_acosh.obj"

-	-@erase "$(INTDIR)\w_asin.obj"

-	-@erase "$(INTDIR)\w_atan2.obj"

-	-@erase "$(INTDIR)\w_atanh.obj"

-	-@erase "$(INTDIR)\w_cosh.obj"

-	-@erase "$(INTDIR)\w_exp.obj"

-	-@erase "$(INTDIR)\w_fmod.obj"

-	-@erase "$(INTDIR)\w_gamma.obj"

-	-@erase "$(INTDIR)\w_gamma_r.obj"

-	-@erase "$(INTDIR)\w_hypot.obj"

-	-@erase "$(INTDIR)\w_j0.obj"

-	-@erase "$(INTDIR)\w_j1.obj"

-	-@erase "$(INTDIR)\w_jn.obj"

-	-@erase "$(INTDIR)\w_lgamma.obj"

-	-@erase "$(INTDIR)\w_lgamma_r.obj"

-	-@erase "$(INTDIR)\w_log.obj"

-	-@erase "$(INTDIR)\w_log10.obj"

-	-@erase "$(INTDIR)\w_pow.obj"

-	-@erase "$(INTDIR)\w_remainder.obj"

-	-@erase "$(INTDIR)\w_scalb.obj"

-	-@erase "$(INTDIR)\w_sinh.obj"

-	-@erase "$(INTDIR)\w_sqrt.obj"

-	-@erase "$(OUTDIR)\fdlibm.lib"

-

-"$(OUTDIR)" :

-    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

-

-# ADD BASE CPP /nologo /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c

-# ADD CPP /nologo /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS" /YX /c

-CPP_PROJ=/nologo /MLd /W3 /GX /Z7 /Od /D "WIN32" /D "_DEBUG" /D "_WINDOWS"\

- /Fp"$(INTDIR)/fdlibm.pch" /YX /Fo"$(INTDIR)/" /c 

-CPP_OBJS=.\fdlibm_0/

-CPP_SBRS=.\.

-BSC32=bscmake.exe

-# ADD BASE BSC32 /nologo

-# ADD BSC32 /nologo

-BSC32_FLAGS=/nologo /o"$(OUTDIR)/fdlibm.bsc" 

-BSC32_SBRS= \

-	

-LIB32=link.exe -lib

-# ADD BASE LIB32 /nologo

-# ADD LIB32 /nologo

-LIB32_FLAGS=/nologo /out:"$(OUTDIR)/fdlibm.lib" 

-LIB32_OBJS= \

-	"$(INTDIR)\e_acos.obj" \

-	"$(INTDIR)\e_acosh.obj" \

-	"$(INTDIR)\e_asin.obj" \

-	"$(INTDIR)\e_atan2.obj" \

-	"$(INTDIR)\e_atanh.obj" \

-	"$(INTDIR)\e_cosh.obj" \

-	"$(INTDIR)\e_exp.obj" \

-	"$(INTDIR)\e_fmod.obj" \

-	"$(INTDIR)\e_gamma.obj" \

-	"$(INTDIR)\e_gamma_r.obj" \

-	"$(INTDIR)\e_hypot.obj" \

-	"$(INTDIR)\e_j0.obj" \

-	"$(INTDIR)\e_j1.obj" \

-	"$(INTDIR)\e_jn.obj" \

-	"$(INTDIR)\e_lgamma.obj" \

-	"$(INTDIR)\e_lgamma_r.obj" \

-	"$(INTDIR)\e_log.obj" \

-	"$(INTDIR)\e_log10.obj" \

-	"$(INTDIR)\e_pow.obj" \

-	"$(INTDIR)\e_rem_pio2.obj" \

-	"$(INTDIR)\e_remainder.obj" \

-	"$(INTDIR)\e_scalb.obj" \

-	"$(INTDIR)\e_sinh.obj" \

-	"$(INTDIR)\e_sqrt.obj" \

-	"$(INTDIR)\k_cos.obj" \

-	"$(INTDIR)\k_rem_pio2.obj" \

-	"$(INTDIR)\k_sin.obj" \

-	"$(INTDIR)\k_standard.obj" \

-	"$(INTDIR)\k_tan.obj" \

-	"$(INTDIR)\s_asinh.obj" \

-	"$(INTDIR)\s_atan.obj" \

-	"$(INTDIR)\s_cbrt.obj" \

-	"$(INTDIR)\s_ceil.obj" \

-	"$(INTDIR)\s_copysign.obj" \

-	"$(INTDIR)\s_cos.obj" \

-	"$(INTDIR)\s_erf.obj" \

-	"$(INTDIR)\s_expm1.obj" \

-	"$(INTDIR)\s_fabs.obj" \

-	"$(INTDIR)\s_finite.obj" \

-	"$(INTDIR)\s_floor.obj" \

-	"$(INTDIR)\s_frexp.obj" \

-	"$(INTDIR)\s_ilogb.obj" \

-	"$(INTDIR)\s_isnan.obj" \

-	"$(INTDIR)\s_ldexp.obj" \

-	"$(INTDIR)\s_lib_version.obj" \

-	"$(INTDIR)\s_log1p.obj" \

-	"$(INTDIR)\s_logb.obj" \

-	"$(INTDIR)\s_matherr.obj" \

-	"$(INTDIR)\s_modf.obj" \

-	"$(INTDIR)\s_nextafter.obj" \

-	"$(INTDIR)\s_rint.obj" \

-	"$(INTDIR)\s_scalbn.obj" \

-	"$(INTDIR)\s_signgam.obj" \

-	"$(INTDIR)\s_significand.obj" \

-	"$(INTDIR)\s_sin.obj" \

-	"$(INTDIR)\s_tan.obj" \

-	"$(INTDIR)\s_tanh.obj" \

-	"$(INTDIR)\w_acos.obj" \

-	"$(INTDIR)\w_acosh.obj" \

-	"$(INTDIR)\w_asin.obj" \

-	"$(INTDIR)\w_atan2.obj" \

-	"$(INTDIR)\w_atanh.obj" \

-	"$(INTDIR)\w_cosh.obj" \

-	"$(INTDIR)\w_exp.obj" \

-	"$(INTDIR)\w_fmod.obj" \

-	"$(INTDIR)\w_gamma.obj" \

-	"$(INTDIR)\w_gamma_r.obj" \

-	"$(INTDIR)\w_hypot.obj" \

-	"$(INTDIR)\w_j0.obj" \

-	"$(INTDIR)\w_j1.obj" \

-	"$(INTDIR)\w_jn.obj" \

-	"$(INTDIR)\w_lgamma.obj" \

-	"$(INTDIR)\w_lgamma_r.obj" \

-	"$(INTDIR)\w_log.obj" \

-	"$(INTDIR)\w_log10.obj" \

-	"$(INTDIR)\w_pow.obj" \

-	"$(INTDIR)\w_remainder.obj" \

-	"$(INTDIR)\w_scalb.obj" \

-	"$(INTDIR)\w_sinh.obj" \

-	"$(INTDIR)\w_sqrt.obj"

-

-"$(OUTDIR)\fdlibm.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS)

-    $(LIB32) @<<

-  $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS)

-<<

-

-!ENDIF 

-

-.c{$(CPP_OBJS)}.obj:

-   $(CPP) $(CPP_PROJ) $<  

-

-.cpp{$(CPP_OBJS)}.obj:

-   $(CPP) $(CPP_PROJ) $<  

-

-.cxx{$(CPP_OBJS)}.obj:

-   $(CPP) $(CPP_PROJ) $<  

-

-.c{$(CPP_SBRS)}.sbr:

-   $(CPP) $(CPP_PROJ) $<  

-

-.cpp{$(CPP_SBRS)}.sbr:

-   $(CPP) $(CPP_PROJ) $<  

-

-.cxx{$(CPP_SBRS)}.sbr:

-   $(CPP) $(CPP_PROJ) $<  

-

-################################################################################

-# Begin Target

-

-# Name "fdlibm - Win32 Release"

-# Name "fdlibm - Win32 Debug"

-

-!IF  "$(CFG)" == "fdlibm - Win32 Release"

-

-!ELSEIF  "$(CFG)" == "fdlibm - Win32 Debug"

-

-!ENDIF 

-

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_sqrt.c

-DEP_CPP_W_SQR=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_sqrt.obj" : $(SOURCE) $(DEP_CPP_W_SQR) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_acosh.c

-DEP_CPP_E_ACO=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_acosh.obj" : $(SOURCE) $(DEP_CPP_E_ACO) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_asin.c

-DEP_CPP_E_ASI=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_asin.obj" : $(SOURCE) $(DEP_CPP_E_ASI) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_atan2.c

-DEP_CPP_E_ATA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_atan2.obj" : $(SOURCE) $(DEP_CPP_E_ATA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_atanh.c

-DEP_CPP_E_ATAN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_atanh.obj" : $(SOURCE) $(DEP_CPP_E_ATAN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_cosh.c

-DEP_CPP_E_COS=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_cosh.obj" : $(SOURCE) $(DEP_CPP_E_COS) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_exp.c

-DEP_CPP_E_EXP=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_exp.obj" : $(SOURCE) $(DEP_CPP_E_EXP) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_fmod.c

-DEP_CPP_E_FMO=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_fmod.obj" : $(SOURCE) $(DEP_CPP_E_FMO) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_gamma.c

-DEP_CPP_E_GAM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_gamma.obj" : $(SOURCE) $(DEP_CPP_E_GAM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_gamma_r.c

-DEP_CPP_E_GAMM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_gamma_r.obj" : $(SOURCE) $(DEP_CPP_E_GAMM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_hypot.c

-DEP_CPP_E_HYP=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_hypot.obj" : $(SOURCE) $(DEP_CPP_E_HYP) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_j0.c

-DEP_CPP_E_J0_=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_j0.obj" : $(SOURCE) $(DEP_CPP_E_J0_) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_j1.c

-DEP_CPP_E_J1_=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_j1.obj" : $(SOURCE) $(DEP_CPP_E_J1_) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_jn.c

-DEP_CPP_E_JN_=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_jn.obj" : $(SOURCE) $(DEP_CPP_E_JN_) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_lgamma.c

-DEP_CPP_E_LGA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_lgamma.obj" : $(SOURCE) $(DEP_CPP_E_LGA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_lgamma_r.c

-DEP_CPP_E_LGAM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_lgamma_r.obj" : $(SOURCE) $(DEP_CPP_E_LGAM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_log.c

-DEP_CPP_E_LOG=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_log.obj" : $(SOURCE) $(DEP_CPP_E_LOG) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_log10.c

-DEP_CPP_E_LOG1=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_log10.obj" : $(SOURCE) $(DEP_CPP_E_LOG1) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_pow.c

-DEP_CPP_E_POW=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_pow.obj" : $(SOURCE) $(DEP_CPP_E_POW) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_rem_pio2.c

-DEP_CPP_E_REM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_rem_pio2.obj" : $(SOURCE) $(DEP_CPP_E_REM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_remainder.c

-DEP_CPP_E_REMA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_remainder.obj" : $(SOURCE) $(DEP_CPP_E_REMA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_scalb.c

-DEP_CPP_E_SCA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_scalb.obj" : $(SOURCE) $(DEP_CPP_E_SCA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_sinh.c

-DEP_CPP_E_SIN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_sinh.obj" : $(SOURCE) $(DEP_CPP_E_SIN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_sqrt.c

-DEP_CPP_E_SQR=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_sqrt.obj" : $(SOURCE) $(DEP_CPP_E_SQR) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\fdlibm.h

-

-!IF  "$(CFG)" == "fdlibm - Win32 Release"

-

-!ELSEIF  "$(CFG)" == "fdlibm - Win32 Debug"

-

-!ENDIF 

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\k_cos.c

-DEP_CPP_K_COS=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\k_cos.obj" : $(SOURCE) $(DEP_CPP_K_COS) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\k_rem_pio2.c

-DEP_CPP_K_REM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\k_rem_pio2.obj" : $(SOURCE) $(DEP_CPP_K_REM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\k_sin.c

-DEP_CPP_K_SIN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\k_sin.obj" : $(SOURCE) $(DEP_CPP_K_SIN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\k_standard.c

-DEP_CPP_K_STA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\k_standard.obj" : $(SOURCE) $(DEP_CPP_K_STA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\k_tan.c

-DEP_CPP_K_TAN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\k_tan.obj" : $(SOURCE) $(DEP_CPP_K_TAN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_asinh.c

-DEP_CPP_S_ASI=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_asinh.obj" : $(SOURCE) $(DEP_CPP_S_ASI) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_atan.c

-DEP_CPP_S_ATA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_atan.obj" : $(SOURCE) $(DEP_CPP_S_ATA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_cbrt.c

-DEP_CPP_S_CBR=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_cbrt.obj" : $(SOURCE) $(DEP_CPP_S_CBR) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_ceil.c

-DEP_CPP_S_CEI=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_ceil.obj" : $(SOURCE) $(DEP_CPP_S_CEI) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_copysign.c

-DEP_CPP_S_COP=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_copysign.obj" : $(SOURCE) $(DEP_CPP_S_COP) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_cos.c

-DEP_CPP_S_COS=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_cos.obj" : $(SOURCE) $(DEP_CPP_S_COS) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_erf.c

-DEP_CPP_S_ERF=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_erf.obj" : $(SOURCE) $(DEP_CPP_S_ERF) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_expm1.c

-DEP_CPP_S_EXP=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_expm1.obj" : $(SOURCE) $(DEP_CPP_S_EXP) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_fabs.c

-DEP_CPP_S_FAB=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_fabs.obj" : $(SOURCE) $(DEP_CPP_S_FAB) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_finite.c

-DEP_CPP_S_FIN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_finite.obj" : $(SOURCE) $(DEP_CPP_S_FIN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_floor.c

-DEP_CPP_S_FLO=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_floor.obj" : $(SOURCE) $(DEP_CPP_S_FLO) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_frexp.c

-DEP_CPP_S_FRE=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_frexp.obj" : $(SOURCE) $(DEP_CPP_S_FRE) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_ilogb.c

-DEP_CPP_S_ILO=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_ilogb.obj" : $(SOURCE) $(DEP_CPP_S_ILO) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_isnan.c

-DEP_CPP_S_ISN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_isnan.obj" : $(SOURCE) $(DEP_CPP_S_ISN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_ldexp.c

-DEP_CPP_S_LDE=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_ldexp.obj" : $(SOURCE) $(DEP_CPP_S_LDE) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_lib_version.c

-DEP_CPP_S_LIB=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_lib_version.obj" : $(SOURCE) $(DEP_CPP_S_LIB) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_log1p.c

-DEP_CPP_S_LOG=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_log1p.obj" : $(SOURCE) $(DEP_CPP_S_LOG) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_logb.c

-DEP_CPP_S_LOGB=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_logb.obj" : $(SOURCE) $(DEP_CPP_S_LOGB) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_matherr.c

-DEP_CPP_S_MAT=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_matherr.obj" : $(SOURCE) $(DEP_CPP_S_MAT) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_modf.c

-DEP_CPP_S_MOD=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_modf.obj" : $(SOURCE) $(DEP_CPP_S_MOD) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_nextafter.c

-DEP_CPP_S_NEX=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_nextafter.obj" : $(SOURCE) $(DEP_CPP_S_NEX) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_rint.c

-DEP_CPP_S_RIN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_rint.obj" : $(SOURCE) $(DEP_CPP_S_RIN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_scalbn.c

-DEP_CPP_S_SCA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_scalbn.obj" : $(SOURCE) $(DEP_CPP_S_SCA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_signgam.c

-DEP_CPP_S_SIG=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_signgam.obj" : $(SOURCE) $(DEP_CPP_S_SIG) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_significand.c

-DEP_CPP_S_SIGN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_significand.obj" : $(SOURCE) $(DEP_CPP_S_SIGN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_sin.c

-DEP_CPP_S_SIN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_sin.obj" : $(SOURCE) $(DEP_CPP_S_SIN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_tan.c

-DEP_CPP_S_TAN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_tan.obj" : $(SOURCE) $(DEP_CPP_S_TAN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\s_tanh.c

-DEP_CPP_S_TANH=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\s_tanh.obj" : $(SOURCE) $(DEP_CPP_S_TANH) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_acos.c

-DEP_CPP_W_ACO=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_acos.obj" : $(SOURCE) $(DEP_CPP_W_ACO) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_acosh.c

-DEP_CPP_W_ACOS=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_acosh.obj" : $(SOURCE) $(DEP_CPP_W_ACOS) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_asin.c

-DEP_CPP_W_ASI=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_asin.obj" : $(SOURCE) $(DEP_CPP_W_ASI) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_atan2.c

-DEP_CPP_W_ATA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_atan2.obj" : $(SOURCE) $(DEP_CPP_W_ATA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_atanh.c

-DEP_CPP_W_ATAN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_atanh.obj" : $(SOURCE) $(DEP_CPP_W_ATAN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_cosh.c

-DEP_CPP_W_COS=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_cosh.obj" : $(SOURCE) $(DEP_CPP_W_COS) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_exp.c

-DEP_CPP_W_EXP=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_exp.obj" : $(SOURCE) $(DEP_CPP_W_EXP) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_fmod.c

-DEP_CPP_W_FMO=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_fmod.obj" : $(SOURCE) $(DEP_CPP_W_FMO) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_gamma.c

-DEP_CPP_W_GAM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_gamma.obj" : $(SOURCE) $(DEP_CPP_W_GAM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_gamma_r.c

-DEP_CPP_W_GAMM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_gamma_r.obj" : $(SOURCE) $(DEP_CPP_W_GAMM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_hypot.c

-DEP_CPP_W_HYP=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_hypot.obj" : $(SOURCE) $(DEP_CPP_W_HYP) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_j0.c

-DEP_CPP_W_J0_=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_j0.obj" : $(SOURCE) $(DEP_CPP_W_J0_) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_j1.c

-DEP_CPP_W_J1_=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_j1.obj" : $(SOURCE) $(DEP_CPP_W_J1_) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_jn.c

-DEP_CPP_W_JN_=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_jn.obj" : $(SOURCE) $(DEP_CPP_W_JN_) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_lgamma.c

-DEP_CPP_W_LGA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_lgamma.obj" : $(SOURCE) $(DEP_CPP_W_LGA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_lgamma_r.c

-DEP_CPP_W_LGAM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_lgamma_r.obj" : $(SOURCE) $(DEP_CPP_W_LGAM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_log.c

-DEP_CPP_W_LOG=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_log.obj" : $(SOURCE) $(DEP_CPP_W_LOG) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_log10.c

-DEP_CPP_W_LOG1=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_log10.obj" : $(SOURCE) $(DEP_CPP_W_LOG1) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_pow.c

-DEP_CPP_W_POW=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_pow.obj" : $(SOURCE) $(DEP_CPP_W_POW) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_remainder.c

-DEP_CPP_W_REM=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_remainder.obj" : $(SOURCE) $(DEP_CPP_W_REM) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_scalb.c

-DEP_CPP_W_SCA=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_scalb.obj" : $(SOURCE) $(DEP_CPP_W_SCA) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\w_sinh.c

-DEP_CPP_W_SIN=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\w_sinh.obj" : $(SOURCE) $(DEP_CPP_W_SIN) "$(INTDIR)"

-

-

-# End Source File

-################################################################################

-# Begin Source File

-

-SOURCE=.\e_acos.c

-DEP_CPP_E_ACOS=\

-	".\fdlibm.h"\

-	

-

-"$(INTDIR)\e_acos.obj" : $(SOURCE) $(DEP_CPP_E_ACOS) "$(INTDIR)"

-

-

-# End Source File

-# End Target

-# End Project

-################################################################################

diff --git a/src/dom/js/fdlibm/fdlibm.mdp b/src/dom/js/fdlibm/fdlibm.mdp
deleted file mode 100644
index 5904c4940..000000000
--- a/src/dom/js/fdlibm/fdlibm.mdp
+++ /dev/null
diff --git a/src/dom/js/fdlibm/k_cos.c b/src/dom/js/fdlibm/k_cos.c
index 17b505d58..1d18c8034 100644
--- a/src/dom/js/fdlibm/k_cos.c
+++ b/src/dom/js/fdlibm/k_cos.c
@@ -107,7 +107,8 @@ C6  = -1.13596475577881948265e-11; /* 0xBDA8FAE9, 0xBE8838D4 */
 #endif
 {
         fd_twoints u;
-	double a,hz,z,r,qx;
+        double qx = 0;
+	double a,hz,z,r;
 	int ix;
         u.d = x;
 	ix = __HI(u)&0x7fffffff;	/* ix = |x|'s high word*/