diff options
Diffstat (limited to 'Doxyfile')
| -rw-r--r-- | Doxyfile | 477 |
1 files changed, 279 insertions, 198 deletions
@@ -1,4 +1,4 @@ -# Doxyfile 1.8.6 +# Doxyfile 1.8.9.1 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -38,7 +38,7 @@ PROJECT_NAME = inkscape # could be handy for archiving the generated documentation or if some version # control system is used. -PROJECT_NUMBER = +PROJECT_NUMBER = # Using the PROJECT_BRIEF tag one can provide an optional one line description # for a project that appears at the top of each page and should give viewer a @@ -46,10 +46,10 @@ PROJECT_NUMBER = PROJECT_BRIEF = "Vector Graphics Editor" -# With the PROJECT_LOGO tag one can specify an logo or icon that is included in -# the documentation. The maximum height of the logo should not exceed 55 pixels -# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo -# to the output directory. +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. PROJECT_LOGO = inkscape.png @@ -60,7 +60,7 @@ PROJECT_LOGO = inkscape.png OUTPUT_DIRECTORY = doxygen -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub- +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- # directories (in 2 levels) under the output directory of each output format and # will distribute the generated files over these directories. Enabling this # option can be useful when feeding doxygen a huge amount of source files, where @@ -70,6 +70,14 @@ OUTPUT_DIRECTORY = doxygen CREATE_SUBDIRS = NO +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + # The OUTPUT_LANGUAGE tag is used to specify the language in which all # documentation generated by doxygen is written. Doxygen will use this # information to generate all constant output in the proper language. @@ -85,14 +93,14 @@ CREATE_SUBDIRS = NO OUTPUT_LANGUAGE = English -# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. # The default value is: YES. BRIEF_MEMBER_DESC = YES -# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief # description of a member or function before the detailed description # # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the @@ -110,7 +118,7 @@ REPEAT_BRIEF = YES # the entity):The $name class, The $name widget, The $name file, is, provides, # specifies, contains, represents, a, an and the. -ABBREVIATE_BRIEF = +ABBREVIATE_BRIEF = # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then # doxygen will generate a detailed section even if there is only a brief @@ -127,7 +135,7 @@ ALWAYS_DETAILED_SEC = NO INLINE_INHERITED_MEMB = NO -# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path # before files name in the file list and in the header files. If set to NO the # shortest path that makes the file name unique will be used # The default value is: YES. @@ -144,7 +152,7 @@ FULL_PATH_NAMES = YES # will be relative from the directory where doxygen is started. # This tag requires that the tag FULL_PATH_NAMES is set to YES. -STRIP_FROM_PATH = +STRIP_FROM_PATH = # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the # path mentioned in the documentation of a class, which tells the reader which @@ -153,7 +161,7 @@ STRIP_FROM_PATH = # specify the list of include paths that are normally passed to the compiler # using the -I flag. -STRIP_FROM_INC_PATH = +STRIP_FROM_INC_PATH = # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but # less readable) file names. This can be useful is your file systems doesn't @@ -197,9 +205,9 @@ MULTILINE_CPP_IS_BRIEF = NO INHERIT_DOCS = YES -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a -# new page for each member. If set to NO, the documentation of a member will be -# part of the file/class/namespace that contains it. +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. # The default value is: NO. SEPARATE_MEMBER_PAGES = NO @@ -220,13 +228,13 @@ TAB_SIZE = 4 # "Side Effects:". You can put \n's in the value part of an alias to insert # newlines. -ALIASES = +ALIASES = # This tag can be used to specify a number of word-keyword mappings (TCL only). # A mapping has the form "name=value". For example adding "class=itcl::class" # will allow you to use the command class in the itcl::class meaning. -TCL_SUBST = +TCL_SUBST = # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources # only. Doxygen will then generate output that is more tailored for C. For @@ -234,7 +242,7 @@ TCL_SUBST = # members will be omitted, etc. # The default value is: NO. -OPTIMIZE_OUTPUT_FOR_C = YES +OPTIMIZE_OUTPUT_FOR_C = NO # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or # Python sources only. Doxygen will then generate output that is more tailored @@ -261,16 +269,19 @@ OPTIMIZE_OUTPUT_VHDL = NO # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL. For instance to make -# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C -# (default is Fortran), use: inc=Fortran f=C. +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. # -# Note For files without extension you can use no_extension as a placeholder. +# Note: For files without extension you can use no_extension as a placeholder. # # Note that for custom extensions you also need to set FILE_PATTERNS otherwise # the files are not read by doxygen. -EXTENSION_MAPPING = +EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable @@ -284,8 +295,8 @@ MARKDOWN_SUPPORT = YES # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can -# be prevented in individual cases by by putting a % sign in front of the word -# or globally by setting AUTOLINK_SUPPORT to NO. +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. # The default value is: YES. AUTOLINK_SUPPORT = YES @@ -325,7 +336,7 @@ SIP_SUPPORT = NO IDL_PROPERTY_SUPPORT = YES # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first +# tag is set to YES then doxygen will reuse the documentation of the first # member in the group (if any) for the other members of the group. By default # all members of a group must be documented explicitly. # The default value is: NO. @@ -390,7 +401,7 @@ LOOKUP_CACHE_SIZE = 1 # Build related configuration options #--------------------------------------------------------------------------- -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in # documentation are documented, even if no documentation was available. Private # class members and static file members will be hidden unless the # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. @@ -400,35 +411,35 @@ LOOKUP_CACHE_SIZE = 1 EXTRACT_ALL = YES -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will # be included in the documentation. # The default value is: NO. EXTRACT_PRIVATE = YES -# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. EXTRACT_PACKAGE = NO -# If the EXTRACT_STATIC tag is set to YES all static members of a file will be +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be # included in the documentation. # The default value is: NO. EXTRACT_STATIC = YES -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined -# locally in source files will be included in the documentation. If set to NO +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, # only classes defined in header files are included. Does not have any effect # for Java sources. # The default value is: YES. EXTRACT_LOCAL_CLASSES = NO -# This flag is only useful for Objective-C code. When set to YES local methods, +# This flag is only useful for Objective-C code. If set to YES, local methods, # which are defined in the implementation section but not in the interface are -# included in the documentation. If set to NO only methods in the interface are +# included in the documentation. If set to NO, only methods in the interface are # included. # The default value is: NO. @@ -453,21 +464,21 @@ HIDE_UNDOC_MEMBERS = NO # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all # undocumented classes that are normally visible in the class hierarchy. If set -# to NO these classes will be included in the various overviews. This option has -# no effect if EXTRACT_ALL is enabled. +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. # The default value is: NO. HIDE_UNDOC_CLASSES = NO # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend -# (class|struct|union) declarations. If set to NO these declarations will be +# (class|struct|union) declarations. If set to NO, these declarations will be # included in the documentation. # The default value is: NO. HIDE_FRIEND_COMPOUNDS = NO # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any -# documentation blocks found inside the body of a function. If set to NO these +# documentation blocks found inside the body of a function. If set to NO, these # blocks will be appended to the function's detailed documentation block. # The default value is: NO. @@ -481,7 +492,7 @@ HIDE_IN_BODY_DOCS = NO INTERNAL_DOCS = NO # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file -# names in lower-case letters. If set to YES upper-case letters are also +# names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows # and Mac users are advised to set this option to NO. @@ -490,11 +501,18 @@ INTERNAL_DOCS = NO CASE_SENSE_NAMES = YES # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with -# their full class and namespace scopes in the documentation. If set to YES the +# their full class and namespace scopes in the documentation. If set to YES, the # scope will be hidden. # The default value is: NO. -HIDE_SCOPE_NAMES = YES +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of # the files that are included by a file in the documentation of that file. @@ -523,14 +541,14 @@ INLINE_INFO = YES # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the # (detailed) documentation of file and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. +# name. If set to NO, the members will appear in declaration order. # The default value is: YES. SORT_MEMBER_DOCS = YES # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief # descriptions of file, namespace and class members alphabetically by member -# name. If set to NO the members will appear in declaration order. Note that +# name. If set to NO, the members will appear in declaration order. Note that # this will also influence the order of the classes in the class list. # The default value is: NO. @@ -575,27 +593,25 @@ SORT_BY_SCOPE_NAME = NO STRICT_PROTO_MATCHING = NO -# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the -# todo list. This list is created by putting \todo commands in the -# documentation. +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. # The default value is: YES. GENERATE_TODOLIST = YES -# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the -# test list. This list is created by putting \test commands in the -# documentation. +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. # The default value is: YES. GENERATE_TESTLIST = YES -# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug # list. This list is created by putting \bug commands in the documentation. # The default value is: YES. GENERATE_BUGLIST = YES -# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO) +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) # the deprecated list. This list is created by putting \deprecated commands in # the documentation. # The default value is: YES. @@ -606,7 +622,7 @@ GENERATE_DEPRECATEDLIST= YES # sections, marked by \if <section_label> ... \endif and \cond <section_label> # ... \endcond blocks. -ENABLED_SECTIONS = +ENABLED_SECTIONS = # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the # initial value of a variable or macro / define can have for it to appear in the @@ -620,8 +636,8 @@ ENABLED_SECTIONS = MAX_INITIALIZER_LINES = 30 # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at -# the bottom of the documentation of classes and structs. If set to YES the list -# will mention the files that were used to generate the documentation. +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. # The default value is: YES. SHOW_USED_FILES = YES @@ -648,7 +664,7 @@ SHOW_NAMESPACES = YES # by doxygen. Whatever the program writes to standard output is used as the file # version. For an example see the documentation. -FILE_VERSION_FILTER = +FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated @@ -661,7 +677,7 @@ FILE_VERSION_FILTER = # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE # tag is left empty. -LAYOUT_FILE = +LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib @@ -669,10 +685,9 @@ LAYOUT_FILE = # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the -# search path. Do not use file names with spaces, bibtex cannot handle them. See -# also \cite for info how to create references. +# search path. See also \cite for info how to create references. -CITE_BIB_FILES = +CITE_BIB_FILES = #--------------------------------------------------------------------------- # Configuration options related to warning and progress messages @@ -686,7 +701,7 @@ CITE_BIB_FILES = QUIET = NO # The WARNINGS tag can be used to turn on/off the warning messages that are -# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES # this implies that the warnings are on. # # Tip: Turn warnings on while writing the documentation. @@ -694,7 +709,7 @@ QUIET = NO WARNINGS = YES -# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag # will automatically be disabled. # The default value is: YES. @@ -711,8 +726,8 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return -# value. If set to NO doxygen will only warn about wrong or incomplete parameter -# documentation, but not about the absence of documentation. +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. # The default value is: NO. WARN_NO_PARAMDOC = NO @@ -780,7 +795,7 @@ RECURSIVE = YES # Note that relative paths are relative to the directory from which doxygen is # run. -EXCLUDE = +EXCLUDE = # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or # directories that are symbolic links (a Unix file system feature) are excluded @@ -796,7 +811,7 @@ EXCLUDE_SYMLINKS = YES # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories for example use the pattern */test/* -EXCLUDE_PATTERNS = +EXCLUDE_PATTERNS = # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names # (namespaces, classes, functions, etc.) that should be excluded from the @@ -807,20 +822,20 @@ EXCLUDE_PATTERNS = # Note that the wildcards are matched against the file with absolute path, so to # exclude all test directories use the pattern */test/* -EXCLUDE_SYMBOLS = +EXCLUDE_SYMBOLS = # The EXAMPLE_PATH tag can be used to specify one or more files or directories # that contain example code fragments that are included (see the \include # command). -EXAMPLE_PATH = +EXAMPLE_PATH = # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and # *.h) to filter out the source-files in the directories. If left blank all # files are included. -EXAMPLE_PATTERNS = +EXAMPLE_PATTERNS = # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be # searched for input files to be used with the \include or \dontinclude commands @@ -833,7 +848,7 @@ EXAMPLE_RECURSIVE = NO # that contain images that are to be included in the documentation (see the # \image command). -IMAGE_PATH = +IMAGE_PATH = # The INPUT_FILTER tag can be used to specify a program that doxygen should # invoke to filter for each input file. Doxygen will invoke the filter program @@ -850,7 +865,7 @@ IMAGE_PATH = # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. -INPUT_FILTER = +INPUT_FILTER = # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern # basis. Doxygen will compare the file name with each pattern and apply the @@ -859,10 +874,10 @@ INPUT_FILTER = # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. -FILTER_PATTERNS = +FILTER_PATTERNS = # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER ) will also be used to filter the input files that are used for +# INPUT_FILTER) will also be used to filter the input files that are used for # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). # The default value is: NO. @@ -874,14 +889,14 @@ FILTER_SOURCE_FILES = NO # *.ext= (so without naming a filter). # This tag requires that the tag FILTER_SOURCE_FILES is set to YES. -FILTER_SOURCE_PATTERNS = +FILTER_SOURCE_PATTERNS = # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that # is part of the input, its contents will be placed on the main page # (index.html). This can be useful if you have a project on for instance GitHub # and want to reuse the introduction page also for the doxygen output. -USE_MDFILE_AS_MAINPAGE = +USE_MDFILE_AS_MAINPAGE = #--------------------------------------------------------------------------- # Configuration options related to source browsing @@ -894,7 +909,7 @@ USE_MDFILE_AS_MAINPAGE = # also VERBATIM_HEADERS is set to NO. # The default value is: NO. -SOURCE_BROWSER = NO +SOURCE_BROWSER = YES # Setting the INLINE_SOURCES tag to YES will include the body of functions, # classes and enums directly into the documentation. @@ -922,7 +937,7 @@ REFERENCED_BY_RELATION = YES REFERENCES_RELATION = YES # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set -# to YES, then the hyperlinks from functions in REFERENCES_RELATION and +# to YES then the hyperlinks from functions in REFERENCES_RELATION and # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will # link to the documentation. # The default value is: YES. @@ -969,6 +984,25 @@ USE_HTAGS = NO VERBATIM_HEADERS = NO +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# compiled with the --with-libclang option. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -993,13 +1027,13 @@ COLS_IN_ALPHA_INDEX = 5 # while generating the index headers. # This tag requires that the tag ALPHABETICAL_INDEX is set to YES. -IGNORE_PREFIX = +IGNORE_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the HTML output #--------------------------------------------------------------------------- -# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output # The default value is: YES. GENERATE_HTML = YES @@ -1037,7 +1071,7 @@ HTML_FILE_EXTENSION = .html # of the possible markers and block names see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_HEADER = +HTML_HEADER = # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each # generated HTML page. If the tag is left blank doxygen will generate a standard @@ -1047,7 +1081,7 @@ HTML_HEADER = # that doxygen normally uses. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_FOOTER = +HTML_FOOTER = # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style # sheet that is used by each HTML page. It can be used to fine-tune the look of @@ -1059,18 +1093,20 @@ HTML_FOOTER = # obsolete. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_STYLESHEET = +HTML_STYLESHEET = -# The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user- -# defined cascading style sheet that is included after the standard style sheets +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets # created by doxygen. Using this option one can overrule certain style aspects. # This is preferred over using HTML_STYLESHEET since it does not replace the -# standard style sheet and is therefor more robust against future updates. -# Doxygen will copy the style sheet file to the output directory. For an example -# see the documentation. +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_STYLESHEET = +HTML_EXTRA_STYLESHEET = # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the HTML output directory. Note @@ -1080,10 +1116,10 @@ HTML_EXTRA_STYLESHEET = # files will be copied as-is; there are no commands or markers available. # This tag requires that the tag GENERATE_HTML is set to YES. -HTML_EXTRA_FILES = +HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen -# will adjust the colors in the stylesheet and background images according to +# will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see # http://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 @@ -1114,8 +1150,9 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = YES @@ -1208,31 +1245,32 @@ GENERATE_HTMLHELP = NO # written to the html output directory. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -CHM_FILE = +CHM_FILE = # The HHC_LOCATION tag can be used to specify the location (absolute path -# including file name) of the HTML help compiler ( hhc.exe). If non-empty +# including file name) of the HTML help compiler (hhc.exe). If non-empty, # doxygen will try to run the HTML help compiler on the generated index.hhp. # The file has to be specified with full path. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -HHC_LOCATION = +HHC_LOCATION = -# The GENERATE_CHI flag controls if a separate .chi index file is generated ( -# YES) or that it should be included in the master .chm file ( NO). +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. GENERATE_CHI = NO -# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc) +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) # and project file content. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. -CHM_INDEX_ENCODING = +CHM_INDEX_ENCODING = -# The BINARY_TOC flag controls whether a binary table of contents is generated ( -# YES) or a normal table of contents ( NO) in the .chm file. +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. # The default value is: NO. # This tag requires that the tag GENERATE_HTMLHELP is set to YES. @@ -1259,7 +1297,7 @@ GENERATE_QHP = NO # the HTML output folder. # This tag requires that the tag GENERATE_QHP is set to YES. -QCH_FILE = +QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace @@ -1284,7 +1322,7 @@ QHP_VIRTUAL_FOLDER = doc # filters). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_CUST_FILTER_NAME = +QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom @@ -1292,21 +1330,21 @@ QHP_CUST_FILTER_NAME = # filters). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_CUST_FILTER_ATTRS = +QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. -QHP_SECT_FILTER_ATTRS = +QHP_SECT_FILTER_ATTRS = # The QHG_LOCATION tag can be used to specify the location of Qt's # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the # generated .qhp file. # This tag requires that the tag GENERATE_QHP is set to YES. -QHG_LOCATION = +QHG_LOCATION = # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be # generated, together with the HTML files, they form an Eclipse help plugin. To @@ -1345,7 +1383,7 @@ DISABLE_INDEX = NO # index structure (just like the one that is generated for HTML Help). For this # to work a browser that supports JavaScript, DHTML, CSS and frames is required # (i.e. any modern browser). Windows users are probably better off using the -# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can # further fine-tune the look of the index. As an example, the default style # sheet generated by doxygen has an example that shows how to put an image at # the root of the tree instead of the PROJECT_NAME. Since the tree basically has @@ -1354,7 +1392,7 @@ DISABLE_INDEX = NO # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. -GENERATE_TREEVIEW = NO +GENERATE_TREEVIEW = YES # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that # doxygen will group on one line in the generated HTML documentation. @@ -1373,7 +1411,7 @@ ENUM_VALUES_PER_LINE = 4 TREEVIEW_WIDTH = 250 -# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to # external symbols imported via tag files in a separate window. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1402,7 +1440,7 @@ FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see # http://www.mathjax.org) which uses client side Javascript for the rendering -# instead of using prerendered bitmaps. Use this if you do not have LaTeX +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path # to it using the MATHJAX_RELPATH option. @@ -1439,7 +1477,7 @@ MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_EXTENSIONS = +MATHJAX_EXTENSIONS = # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces # of code that will be used on startup of the MathJax code. See the MathJax site @@ -1447,7 +1485,7 @@ MATHJAX_EXTENSIONS = # example see the documentation. # This tag requires that the tag USE_MATHJAX is set to YES. -MATHJAX_CODEFILE = +MATHJAX_CODEFILE = # When the SEARCHENGINE tag is enabled doxygen will generate a search box for # the HTML output. The underlying search engine uses javascript and DHTML and @@ -1468,15 +1506,15 @@ MATHJAX_CODEFILE = # The default value is: YES. # This tag requires that the tag GENERATE_HTML is set to YES. -SEARCHENGINE = NO +SEARCHENGINE = YES # When the SERVER_BASED_SEARCH tag is enabled the search engine will be # implemented using a web server instead of a web client using Javascript. There -# are two flavours of web server based searching depending on the -# EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for -# searching and an index file used by the script. When EXTERNAL_SEARCH is -# enabled the indexing and searching needs to be provided by external tools. See -# the section "External Indexing and Searching" for details. +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. # The default value is: NO. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1488,7 +1526,7 @@ SERVER_BASED_SEARCH = NO # external search engine pointed to by the SEARCHENGINE_URL option to obtain the # search results. # -# Doxygen ships with an example indexer ( doxyindexer) and search engine +# Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library # Xapian (see: http://xapian.org/). # @@ -1501,13 +1539,13 @@ EXTERNAL_SEARCH = NO # The SEARCHENGINE_URL should point to a search engine hosted by a web server # which will return the search results when EXTERNAL_SEARCH is enabled. # -# Doxygen ships with an example indexer ( doxyindexer) and search engine +# Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library # Xapian (see: http://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. -SEARCHENGINE_URL = +SEARCHENGINE_URL = # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed # search data is written to a file for indexing by an external tool. With the @@ -1523,7 +1561,7 @@ SEARCHDATA_FILE = searchdata.xml # projects and redirect the results back to the right project. # This tag requires that the tag SEARCHENGINE is set to YES. -EXTERNAL_SEARCH_ID = +EXTERNAL_SEARCH_ID = # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen # projects other than the one defined by this configuration file, but that are @@ -1533,13 +1571,13 @@ EXTERNAL_SEARCH_ID = # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... # This tag requires that the tag SEARCHENGINE is set to YES. -EXTRA_SEARCH_MAPPINGS = +EXTRA_SEARCH_MAPPINGS = #--------------------------------------------------------------------------- # Configuration options related to the LaTeX output #--------------------------------------------------------------------------- -# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output. +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. # The default value is: YES. GENERATE_LATEX = NO @@ -1570,7 +1608,7 @@ LATEX_CMD_NAME = latex MAKEINDEX_CMD_NAME = makeindex -# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1605,22 +1643,35 @@ EXTRA_PACKAGES = amsmath \ # # Note: Only use a user-defined header if you know what you are doing! The # following commands have a special meaning inside the header: $title, -# $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will -# replace them by respectively the title of the page, the current date and time, -# only the current date, the version number of doxygen, the project name (see -# PROJECT_NAME), or the project number (see PROJECT_NUMBER). +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_HEADER = +LATEX_HEADER = # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the # generated LaTeX document. The footer should contain everything after the last -# chapter. If it is left blank doxygen will generate a standard footer. +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. # # Note: Only use a user-defined footer if you know what you are doing! # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_FOOTER = +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or # other source files which should be copied to the LATEX_OUTPUT output @@ -1628,7 +1679,7 @@ LATEX_FOOTER = # markers available. # This tag requires that the tag GENERATE_LATEX is set to YES. -LATEX_EXTRA_FILES = +LATEX_EXTRA_FILES = # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will @@ -1639,8 +1690,8 @@ LATEX_EXTRA_FILES = PDF_HYPERLINKS = NO -# If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate -# the PDF file directly from the LaTeX files. Set this option to YES to get a +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a # higher quality PDF documentation. # The default value is: YES. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1685,7 +1736,7 @@ LATEX_BIB_STYLE = plain # Configuration options related to the RTF output #--------------------------------------------------------------------------- -# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The # RTF output is optimized for Word 97 and may not look too pretty with other RTF # readers/editors. # The default value is: NO. @@ -1700,7 +1751,7 @@ GENERATE_RTF = NO RTF_OUTPUT = rtf -# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF # documents. This may be useful for small projects and may help to save some # trees in general. # The default value is: NO. @@ -1728,20 +1779,30 @@ RTF_HYPERLINKS = NO # default style sheet that doxygen normally uses. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_STYLESHEET_FILE = +RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is # similar to doxygen's config file. A template extensions file can be generated # using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. -RTF_EXTENSIONS_FILE = +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO #--------------------------------------------------------------------------- # Configuration options related to the man page output #--------------------------------------------------------------------------- -# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for # classes and files. # The default value is: NO. @@ -1765,6 +1826,13 @@ MAN_OUTPUT = man MAN_EXTENSION = .3 +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it # will generate one additional man file for each entity documented in the real # man page(s). These additional files only source the real man page, but without @@ -1778,7 +1846,7 @@ MAN_LINKS = NO # Configuration options related to the XML output #--------------------------------------------------------------------------- -# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that # captures the structure of the code including all documentation. # The default value is: NO. @@ -1792,19 +1860,7 @@ GENERATE_XML = NO XML_OUTPUT = xml -# The XML_SCHEMA tag can be used to specify a XML schema, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify a XML DTD, which can be used by a -# validating XML parser to check the syntax of the XML files. -# This tag requires that the tag GENERATE_XML is set to YES. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program # listings (including syntax highlighting and cross-referencing information) to # the XML output. Note that enabling this will significantly increase the size # of the XML output. @@ -1817,7 +1873,7 @@ XML_PROGRAMLISTING = YES # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- -# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files # that can be used to generate PDF. # The default value is: NO. @@ -1831,14 +1887,23 @@ GENERATE_DOCBOOK = NO DOCBOOK_OUTPUT = docbook +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + #--------------------------------------------------------------------------- # Configuration options for the AutoGen Definitions output #--------------------------------------------------------------------------- -# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen -# Definitions (see http://autogen.sf.net) file that captures the structure of -# the code including all documentation. Note that this feature is still -# experimental and incomplete at the moment. +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -1847,7 +1912,7 @@ GENERATE_AUTOGEN_DEF = NO # Configuration options related to the Perl module output #--------------------------------------------------------------------------- -# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module # file that captures the structure of the code including all documentation. # # Note that this feature is still experimental and incomplete at the moment. @@ -1855,7 +1920,7 @@ GENERATE_AUTOGEN_DEF = NO GENERATE_PERLMOD = NO -# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI # output from the Perl module output. # The default value is: NO. @@ -1863,9 +1928,9 @@ GENERATE_PERLMOD = NO PERLMOD_LATEX = NO -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely # formatted so it can be parsed by a human reader. This is useful if you want to -# understand what is going on. On the other hand, if this tag is set to NO the +# understand what is going on. On the other hand, if this tag is set to NO, the # size of the Perl module output will be much smaller and Perl will parse it # just the same. # The default value is: YES. @@ -1879,20 +1944,20 @@ PERLMOD_PRETTY = YES # overwrite each other's variables. # This tag requires that the tag GENERATE_PERLMOD is set to YES. -PERLMOD_MAKEVAR_PREFIX = +PERLMOD_MAKEVAR_PREFIX = #--------------------------------------------------------------------------- # Configuration options related to the preprocessor #--------------------------------------------------------------------------- -# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all # C-preprocessor directives found in the sources and include files. # The default value is: YES. ENABLE_PREPROCESSING = YES -# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names -# in the source code. If set to NO only conditional compilation will be +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be # performed. Macro expansion can be done in a controlled way by setting # EXPAND_ONLY_PREDEF to YES. # The default value is: NO. @@ -1908,7 +1973,7 @@ MACRO_EXPANSION = NO EXPAND_ONLY_PREDEF = NO -# If the SEARCH_INCLUDES tag is set to YES the includes files in the +# If the SEARCH_INCLUDES tag is set to YES, the include files in the # INCLUDE_PATH will be searched if a #include is found. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -1928,7 +1993,7 @@ INCLUDE_PATH = src # used. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -INCLUDE_FILE_PATTERNS = +INCLUDE_FILE_PATTERNS = # The PREDEFINED tag can be used to specify one or more macro names that are # defined before the preprocessor is started (similar to the -D option of e.g. @@ -1938,7 +2003,7 @@ INCLUDE_FILE_PATTERNS = # recursively expanded use the := operator instead of the = operator. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -PREDEFINED = +PREDEFINED = # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this # tag can be used to specify a list of macro names that should be expanded. The @@ -1947,12 +2012,12 @@ PREDEFINED = # definition found in the source code. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. -EXPAND_AS_DEFINED = +EXPAND_AS_DEFINED = # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will -# remove all refrences to function-like macros that are alone on a line, have an -# all uppercase name, and do not end with a semicolon. Such function macros are -# typically used for boiler-plate code, and will confuse the parser if not +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not # removed. # The default value is: YES. # This tag requires that the tag ENABLE_PREPROCESSING is set to YES. @@ -1972,32 +2037,33 @@ SKIP_FUNCTION_MACROS = YES # where loc1 and loc2 can be relative or absolute paths or URLs. See the # section "Linking to external documentation" for more information about the use # of tag files. -# Note: Each tag file must have an unique name (where the name does NOT include +# Note: Each tag file must have a unique name (where the name does NOT include # the path). If a tag file is not located in the directory in which doxygen is # run, you must also specify the path to the tagfile here. -TAGFILES = +TAGFILES = # When a file name is specified after GENERATE_TAGFILE, doxygen will create a # tag file that is based on the input files it reads. See section "Linking to # external documentation" for more information about the usage of tag files. -GENERATE_TAGFILE = +GENERATE_TAGFILE = -# If the ALLEXTERNALS tag is set to YES all external class will be listed in the -# class index. If set to NO only the inherited external classes will be listed. +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. # The default value is: NO. ALLEXTERNALS = NO -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in -# the modules index. If set to NO, only the current project's groups will be +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be # listed. # The default value is: YES. EXTERNAL_GROUPS = YES -# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in # the related pages index. If set to NO, only the current project's pages will # be listed. # The default value is: YES. @@ -2014,7 +2080,7 @@ PERL_PATH = /usr/bin/perl # Configuration options related to the dot tool #--------------------------------------------------------------------------- -# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to # NO turns the diagrams off. Note that this option also works with HAVE_DOT # disabled, but it is recommended to install and use dot, since it yields more @@ -2030,16 +2096,16 @@ CLASS_DIAGRAMS = YES # the mscgen tool resides. If left empty the tool is assumed to be found in the # default search path. -MSCGEN_PATH = +MSCGEN_PATH = # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. # If left empty dia is assumed to be found in the default search path. -DIA_PATH = +DIA_PATH = -# If set to YES, the inheritance and collaboration graphs will hide inheritance +# If set to YES the inheritance and collaboration graphs will hide inheritance # and usage relations if the target is undocumented or is not a class. # The default value is: YES. @@ -2050,7 +2116,7 @@ HIDE_UNDOC_RELATIONS = YES # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent # Bell Labs. The other options in this section have no effect if this option is # set to NO -# The default value is: NO. +# The default value is: YES. HAVE_DOT = YES @@ -2064,7 +2130,7 @@ HAVE_DOT = YES DOT_NUM_THREADS = 0 -# When you want a differently looking font n the dot files that doxygen +# When you want a differently looking font in the dot files that doxygen # generates you can specify the font name using DOT_FONTNAME. You need to make # sure dot is able to find the font, which can be done by putting it in a # standard location or by setting the DOTFONTPATH environment variable or by @@ -2072,7 +2138,7 @@ DOT_NUM_THREADS = 0 # The default value is: Helvetica. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTNAME = +DOT_FONTNAME = Helvetica # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of # dot graphs. @@ -2086,7 +2152,7 @@ DOT_FONTSIZE = 10 # the path where dot can find it using this tag. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_FONTPATH = +DOT_FONTPATH = # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for # each documented class showing the direct and indirect inheritance relations. @@ -2112,7 +2178,7 @@ COLLABORATION_GRAPH = YES GROUP_GRAPHS = YES -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and # collaboration diagrams in a style similar to the OMG's Unified Modeling # Language. # The default value is: NO. @@ -2202,7 +2268,9 @@ DIRECTORY_GRAPH = YES # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd, +# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo, +# gif:cairo:gd, gif:gd, gif:gd:gd and svg. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2224,26 +2292,39 @@ INTERACTIVE_SVG = NO # found. If left blank, it is assumed the dot tool can be found in the path. # This tag requires that the tag HAVE_DOT is set to YES. -DOT_PATH = +DOT_PATH = # The DOTFILE_DIRS tag can be used to specify one or more directories that # contain dot files that are included in the documentation (see the \dotfile # command). # This tag requires that the tag HAVE_DOT is set to YES. -DOTFILE_DIRS = +DOTFILE_DIRS = # The MSCFILE_DIRS tag can be used to specify one or more directories that # contain msc files that are included in the documentation (see the \mscfile # command). -MSCFILE_DIRS = +MSCFILE_DIRS = # The DIAFILE_DIRS tag can be used to specify one or more directories that # contain dia files that are included in the documentation (see the \diafile # command). -DIAFILE_DIRS = +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes # that will be shown in the graph. If the number of nodes in a graph becomes @@ -2281,7 +2362,7 @@ MAX_DOT_GRAPH_DEPTH = 0 DOT_TRANSPARENT = NO -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output # files in one run (i.e. multiple -o and -T options on the command line). This # makes dot run faster, but since only newer versions of dot (>1.8.10) support # this, this feature is disabled by default. @@ -2298,7 +2379,7 @@ DOT_MULTI_TARGETS = NO GENERATE_LEGEND = YES -# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot # files that are used to generate the various graphs. # The default value is: YES. # This tag requires that the tag HAVE_DOT is set to YES. |